Sony SRX-R320, Service Manual

Page: 29 / 406

1-21 (E)
SRX-R320
Fig. 1-4-2
1-4-2. Noise Filter (RSAN-2010/RSAN-2030)
1. Remove the panel (U7) block assembly. (Refer to Section 1-3-2.)
2. Remove the panel (U2) block assembly. (Refer to Section 1-3-3.)
3. Remove the panel (U3). (Refer to Section 1-3-4.)
4. Open the two covers of the noise fi lter (RSAN-2010) in the direction of the arrow.
5. Loosen the fi ve supplied screws, then remove the fi ve harnesses.
6. Remove the two screws (PSW4
x
10), then remove the noise fi lter (RSAN-2010).
7. Open the two covers of the noise fi lter (RSAN-2030) in the direction of the arrow.
8. Loosen the fi ve supplied screws, then remove the fi ve harnesses.
9. Remove the two screws (PSW4
x
10), then remove the noise fi lter (RSAN-2030).
10. To install, reverse the removal procedure.
PSW
4
x
10
PSW
4
x
10
PSW
4
x
10
PSW
4
x
10
PSW
4
x
10
Covers
Supplied screws
Supplied screws
Noise filter
(RSAN-2010)
Covers
Harnesses
Harnesses
Supplied screws
Noise filter
(RSAN-2030)
Covers
Harnesses
Harnesses