Sony SRS-XB23, Help Manual

Page: 24 / 99

Hint
To disconnect the BLUETOOTH connection, touch the N-marked part of the speaker with the N-marked part of the device again.
You hear voice guidance (BLUETOOTH disconnected) from the speaker and the activity of the (BLUETOOTH) indicator
changes from lit to slow flashing.
If you cannot connect the speaker, try the following.
Move the device over the N-marked part of the speaker slowly.
If the device is in a case, remove the case.
Up to 2 BLUETOOTH devices can be connected to the speaker at the same time. When one of the devices starts playing back
while playing back music on another device, the speaker switches the output and starts outputting the sound from the new device
(Multi-device connection).
Note
When an audio cable is connected to the speaker’s AUDIO IN jack while the speaker and the BLUETOOTH device have been
connected via BLUETOOTH connection, sound from the BLUETOOTH-connected device is not output from the speaker (the
hands-free function is available). To listen to music from the BLUETOOTH device, disconnect the audio cable from the speaker’s
AUDIO IN jack.
If your device is a type that goes into standby mode in response to magnetic force, it may not be able to be connected by NFC.
When using the Stereo Pair function or Party Connect function, touch the speaker where the (BLUETOOTH) indicator flashes.
The device cannot make a BLUETOOTH connection with the speaker where the (BLUETOOTH) indicator turns off.
When using the Stereo Pair function or Party Connect function, you cannot use the multi-device connection.
Related Topic
Listening to music of a device via BLUETOOTH connection
Switching the BLUETOOTH devices connected at the same time (Multi-device-connection)
5-011-814-11(1) Copyright 2020 Sony Corporation
24