Sony SRS-XB23, Help Manual

Page: 36 / 99

Hint
The procedure explained above is for guidance only. For details, refer to the operating instructions supplied with the computer. In
addition, not all the computers are tested and found compatible with the above procedure and the procedure is not applicable to
home-built computers.
Up to 2 BLUETOOTH devices can be connected to the speaker at the same time. When one of the devices starts playing back
while playing back music on another device, the speaker switches the output and starts outputting the sound from the new device
(Multi-device connection).
Note
The pairing mode of the speaker is released after about 5 minutes and the (BLUETOOTH) indicator flashes slowly. However,
when pairing information is not stored in the speaker, such as at the factory settings, the pairing mode is not released. If the
pairing mode is released before finishing the process, repeat from step .
Once BLUETOOTH devices are paired, there is no need to pair them again, except in the following cases:
Pairing information has been deleted after repair, etc.
The speaker is already paired with 8 devices and another device is to be paired.
The speaker can be paired with up to 8 devices. If a new device is paired after 8 devices have already been paired, the device
that was paired earliest is replaced by the new one.
The pairing information with the speaker has been deleted from the BLUETOOTH device.
The speaker is initialized.
When the BLUETOOTH connection is established, you hear voice guidance (BLUETOOTH connected) from the
speaker and the activity of the (BLUETOOTH) indicator changes from flashing to lit.
If the connection attempt fails, repeat the procedure from step .
Click the speaker icon in the top-right of the screen and select [SRS-XB43] from [Output Device].
You can enjoy playing back music, etc. from your computer.
6
36