Sony SRS-XB23 Help Manual Download Page 95

Page: 95 / 99

Help Guide

Wireless Speaker

SRS-XB43

Unable to connect the speaker to a BLUETOOTH device with One-touch connection

(NFC)

If the screen lock is activated on the smartphone, it cannot be connected. Cancel the screen lock on the smartphone

and touch again.

Keep the NFC-compatible device close to the speaker until the device reacts. If you fail to connect, move the device

slowly over the N-marked part of the speaker.

Check that the BLUETOOTH function is activated on the NFC-compatible device.

Check that the NFC function of the device is set to on.

If the device is attached with a case, remove it.

NFC reception sensitivity varies depending on the device. If you repeatedly fail to connect the speaker with a device

by one touch, connect/disconnect it to the speaker by on-screen operation.

Check that your device is compatible with NFC. Look up information on the issue on the customer support website.

To use the Stereo Pair function or Party Connect function, pair with the speaker in which the

(BLUETOOTH)

indicator flashes in blue.

Summary of Contents for SRS-XB23



























































































Search results

Summary of Contents for SRS-XB23

Reviews:

Brands by name

Popular brands

Sony SRS-XB23, Help Manual

Search results

Summary of Contents for SRS-XB23

Reviews:

Brands by name

Popular brands