2-1 (E)
SNC-WR632C/WR602C
2-1. Notes on Replacing the SY-416 Board
When replacing the SY-416 board, perform the following procedure. Otherwise, a trouble such as being
unable to obtain the IP address in DHCP occurs, and this unit does not operate normally.
.
Replace the old Mac address label with the new one. (Section 2-1-2)
.
Rewriting of Mac address and serial number (Section 2-1-3)
.
Firmware version upgrade (Section 2-1-4)
Be sure to perform the version upgrade. Otherwise, this unit may not operate normally.
n
Perform the adjustment in the sequential order as described.
2-1-1. Connection Diagram
When using HPoE
+
Hub (Powerdsine PD-9501G or equivalent)
When using 24 VAC power supply (rating: 80 W or more)
Section 2
Adjustment and Procedure When Replacing the Boards
Color video monitor
75
termination
Personal computer
LAN cable
(straight)
Power supply
HPoE
Hub (Powerdsine PD-9501G or equivalent)
Camera
Color video monitor
75
termination
Personal computer
Power cable
Power supply
24 VAC power supply (rating: 80 W or more)
LAN cable
Camera
