25
Loading Paper Roll and Ink Ribbon
2
Insert the paper roll into the paper holder.
The arrow on the label in the center of the paper roll
must point inwards.
When installing the paper roll, make sure the paper
holder is completely open. Otherwise a malfunction
may occur.
3
Remove the label in the center of the paper roll.
4
Close the paper holder.
When closing the paper holder, take care that the
leading edge of the paper roll does not stick out of the
paper feed opening.
5
Return the paper holder into the unit.
Insert the paper holder until you hear a sharp click.
6
Close the front door.
Loading the ink ribbon
1
Open the side door.
2
Remove the ink ribbon holder.
Note
Note
Summary of Contents for SnapLab UP-CR15L
Page 113: ......
