Basic Operations
35
-EN
The G-CODE feature of this VCR simplifies the task of making timer
recordings. Using G-CODE, you can make all the necessary settings by
just entering the desired program’s 9-digit code, which is available in
your local program guide. To take advantage of this feature, you must
first set up your VCR and assign program positions to the various guide
channels. For details, see “Setting up G-CODE manually” on page
24
.
Before you start...
•
Check that the clock is set correctly.
•
Insert a tape with its safety tab in place. Make sure the tape is longer
than the total recording time.
•
Turn on your TV and tune in to the VCR.
1
Press G-CODE.
The G-CODE menu appears on the TV
screen.
If the clock needs to be set, “PLEASE
SET THE CLOCK” appears on the
screen and the VCR automatically
enters the clock setting mode.
2
Use the number buttons to enter
the desired program’s G-CODE
number.
If you make a mistake, press TIMER
CLEAR and enter the correct number.
3
Select the tape speed, SP or LP, by
pressing TAPE SPEED.
See “To select tape speeds” on page
31
.
TIMER CLEAR
G-CODE, ONCE,
DAILY, WEEKLY
program number
buttons
TAPE SPEED
Notes
•
To record NTSC signals in
EP mode, set the tape speed
to LP.
•
The G-CODE used in this
VCR is for Singapore,
Malaysia, Hong Kong,
Macao, etc. and cannot be
used in areas such as
U.S.A., Canada, Japan,
Korea, Taiwan, and U.K.
G–CODE
SP
SET
:
:
SP
– – –
– – –
– –
–
G–CODE NO.
0 – 9
LP
/
SP LP
/
TAPE SPEED
SP
CONF I RM
:
SP
6 9 1
4 7 7
8 2
–
WEEKLY
LP
/
CANCEL
T I MER CLEAR
:
ONCE DA I L Y
G–CODE
G–CODE NO.
LP
CONF I RM
:
SP
6 9 1
4 7 7
8 2
–
WEEKLY
LP
/
CANCEL
T I MER CLEAR
:
ONCE DA I L Y
G–CODE
G–CODE NO.
(continued)
Recording TV
programs using
G-CODE
u
(on/standby)
Summary of Contents for SLV-X821MK2
Page 56: ...57 EN Additional Information ...
Page 113: ...57 J その他 ...