Sony SLV-X821MK2, Instruction & Operation Manual

Page: 37 / 113

38 -EN Basic Operations
6
Press CURSOR / , then select the
program position by pressing
CURSOR
> / . .
7
Press CURSOR / , then select the
tape speed, SP or LP, by pressing
CURSOR
> / . .
See “To select tape speeds” on page
31.
8
To confirm your program, press
C U R S O R
/ .
The cursor (
I
) appears in the leftmost
column.
To preset another timer setting, move
the cursor to the next line using
CURSOR
. , and repeat steps
3
to
8
.
9
After making the desired timer
settings, press EXECUTE.
10
Press u (on/standby) to turn off the
VCR.
The TIMER indicator on the VCR lights up.
The VCR turns off and enters timer
recording standby mode automatically.
The VCR automatically turns on and starts
recording at the start time, and turns off at
the stop time.
To stop recording
To stop while the VCR is recording a program, press p STOP.
Daily/weekly recording
Daily recording records the same program every day of the week;
weekly recording records the same program on the same day, every
week.
When you set the date to start recording in step 3 above, press CURSOR
. until the desired day appears. Each time you press the button, the
indication changes as shown on the left.
T SET
:
I MER / CHECK SAT
DATE START STOP PROG
SP 6 0 0 8 : 0 0 7 1 . 6
: – – – – – – – : – – – – – . – –
: – – – – – – – : – – – – – . – –
: – – – – – – – : – – – – – . – –
: – – – – – – – : – – – – – . – –
: – – – – – – – : – – – – – . – –
: – – – – – – – : – – – – – . – –
: – – – – – – – : – – – – – . – –
SAT
9 . 1 2
T SET
:
I MER / CHECK SAT
DATE START STOP PROG
SP 6 0 0 8 : 0 0 7 1 . 6
:
– – – – – – –
:
– – – – – . – –
: – – – – – – – : – – – – – . – –
: – – – – – – – : – – – – – . – –
: – – – – – – – : – – – – – . – –
: – – – – – – – : – – – – – . – –
: – – – – – – – : – – – – – . – –
: – – – – – – – : – – – – – . – –
SAT
9 . 1 2
T SET
:
I MER / CHECK SAT
DATE START STOP PROG
SP 6 0 0 8 : 0 0 7 1 . 6
: – – – – – – – : – – – – – . – –
: – – – – – – – : – – – – – . – –
: – – – – – – – : – – – – – . – –
:
– – – – – – –
:
– – – – – . – –
: – – – – – – – : – – – – – . – –
: – – – – – – – : – – – – – . – –
: – – – – – – – : – – – – – . – –
SAT
9 . 1 2
1 month later
the current date
(cycles backward)
SUN-SAT
MON-SAT
MON-FRI
EVERY SAT
EVERY MON
EVERY SUN
Setting the timer manually
(continued)
Tips
•
To set the program position,
you can also use the PROG
+/– or program number
buttons.
•
To record a video source
from LINE 1 or LINE 2,
press INPUT SELECT to
display “L1” or “L2.”
Tip
•
To set the recording tape
speed, you can also use
TAPE SPEED.
Note
•
To record NTSC signals in
EP mode, set the tape speed
to LP.
Tip
•
To change the digits during
setting, press CURSOR
?
to return to the item to be
changed, and select the
digits using CURSOR
> / . .
Note
•
If the power is interrupted
for more than one hour
while the VCR is standing
by for recording, the timer
settings are cleared. Reset
the timer.