5-24
SEL1655G
(3) Method of Starting and Finishing for DF Tool
* SeusEX will start when the DF Tool is started.
Procedure of Starting
1. Start the LensLauncher for DF.
[][][][]
2. Select “SEL1655G_1ST_LENS_ASSY” or “SEL1655G_
MOUNT_ASSY” from the “Select a Model”, and click [OK].
Note:
SEL1655G_1ST_LENS_ASSY : for Adjust the 1st group assy
SEL1655G_MOUNT_ASSY : for Adjust the mount assy
[][][][]
[][][][][][][][][][][][]
[][][][][][][][][][][][]
3. The DF Tool screen and the RACS screen are appeared.
DF Tool screen
[][][][][][][][][][][][]
[][][][]
SEL1655G_1ST_LENS_ASSY
or
SEL1655G_MOUNT_ASSY
RACS screen
[][][][]
[][][][][][][][][][][]
SEL1655G_1ST_LENS_ASSY
or
SEL1655G_MOUNT_ASSY
Procedure of Finishing
1. Click the [CLOSE] button on the RACS screen to close the RACS
screen.
2. Click the [DISCONNECT] button on the DF Tool screen to
disconnect the camera and the PC.
3. “Press the shutter button once.” is displayed, press the SHUTTER
button of the camera and click the [OK] on message.
4. If disconnection completed, “DISCONNECT OK” is displayed.
5. Click the [
] button on the upper right of the DF Tool screen to
finish the DF Tool.
6. “Application Exit?” is displayed, click the [Yes] on message.
7. Turn off the power of camera.
8. Remove the battery pack.
SYS SET
2020/02/04 22:49:28 (GMT+09:00)
