21
Unloading a Cartridge
The cartridge can be removed from the SDX-500V and SDX-400V either
in response to a SCSI Unload Command, or by pressing the EJECT bottom.
By pressing EJECT button, the tape goes to BOT, the drive unthreads it,
and ejects the cartridge from the slot.
Write-protecting a Cartridge
Cartridges can be write-protected by sliding the tab on the back of the
cartridge. In this state, data can be read from the tape but not written onto it.
Using your fingernail, push the switch in the
direction of the arrow to protect the tape from
writing or accidental erasure.
Return the switch to its original position to
re-enable writing.
AIT-1 AIT-2
Using a Cleaning Cartridge
A cleaning function is built into the SDX-500V and SDX-400V so the use
of a cleaning cartridge is not needed. If however the drive experiences
excessive errors, the use of a Sony cleaning cartridge is recommended.
Summary of Contents for SDX-400V
Page 15: ...15 Orientation 10 10 10 10 10 10 10 10 ...
Page 32: ...Printed in Japan ...
