20
Drive Operation
Loading a Cartridge
Note
While setting the data cartridge, do not turn off the host computer. This
may cause a malfunction or damage data.
1
Turn on the basic processing unit. Check that the drive’s
TAPE MOTION LED, CLEANING REQUEST LED and
REPLACE TAPE LED go off.
2
Open the dust cover.
3
Set the AIT data cartridge orientation as shown here and
insert it into the data cartridge slot.
By inserting the data cartridge to the extent, it is automatically set in
the drive and the TAPE MOTION LED lights.
Summary of Contents for SDX-400V
Page 15: ...15 Orientation 10 10 10 10 10 10 10 10 ...
Page 32: ...Printed in Japan ...
