Sony RMT-V408A, Service Manual

Page: 60 / 66

6-6
NOTE:
• Due to standardization, replacements in the
parts list may be different from the parts
specified in the diagrams or the components
used on the set.
• -XX, and -X mean standardized parts, so they
may have some difference from the original one.
• RESISTORS
All resistors are in ohms.
METAL: metal-film resistor
METAL OXIDE: Metal Oxide-film resistor
F: nonflammable
• Not all of the parts are listed.
• Items marked “*” are not stocked since they are
seldom required for routine service. Some delay
should be anticipated when ordering these items.
• SEMICONDUCTORS
In each case, u:
µ
, for example:
uA...:
µ
A... , uPA... ,
µ
PA... ,
uPB... ,
µ
PB... , uPC... ,
µ
PC... ,
uPD...,
µ
PD...
• CAPACITORS:
uF:
µ
F
• COILS
uH:
µ
H
6-2 ELECTRICAL PARTS LIST
Ref. No. Part No. Description Remarks
Ref. No. Part No. Description Remarks
FUNCTION BOARD, COMPLETE
*************************
< CAPACITOR >
C7T01 1-161-323-11 CERAMIC,MLC-AXIAL 1nF 10% 50V
(ED828/ED925/ED929/EZ725/EZ727)
C7T02 1-161-323-11 CERAMIC,MLC-AXIAL 1nF 10% 50V
(ED828/ED925/ED929/EZ725/EZ727)
< DIAL TIMER >
DL701 1-786-352-11 DIAL-TIMER (EASY TIMER) (EXCEPT EZ121)
MAIN BOARD, COMPLETE
*********************
< COIL >
BD1SD1 1-400-085-11 INDUCTOR
BD1SF1 1-400-086-11 CORE-FERRITE BEAD (E, HK, ME)
BD1SF2 1-400-085-11 INDUCTOR (E, HK, ME)
BD1SF3 1-400-085-11 INDUCTOR (E, HK, ME)
BD1SR1 1-400-086-11 CORE-FERRITE BEAD (AUS)
BD1SS1 1-400-085-11 INDUCTOR
BD1SS2 1-400-085-11 INDUCTOR
< CAPACITOR >
C1P102 1-126-437-11 ELECT 47uF 20% 25V
C1P103 1-126-458-61 ELECT 1uF 20% 50V
C1P104 1-126-794-11 ELECT 4.7uF 20% 50V
C1P105 1-126-437-11 ELECT 47uF 20% 25V
C1P106 1-126-437-11 ELECT 47uF 20% 25V
C1P108 1-126-794-11 ELECT 4.7uF 20% 50V
(Hi-Fi model)
C1P109 1-126-458-61 ELECT 1uF 20% 50V
(Hi-Fi model)
C1P120 1-126-437-11 ELECT 47uF 20% 25V
C1SD03 1-165-557-11 CERAMIC,DISC 2.2nF 20% 400V
C1SD04 1-165-557-11 CERAMIC,DISC 2.2nF 20% 400V
C1SD11 1-100-048-11 ELECT 82uF 20% 400V
(E, HK, ME)
C1SD11 1-165-577-11 ELECT 47uF 20% 400V
(AUS)
C1SD12 1-165-574-11 FILM,MPEF 10nF 10% 630V
C1SD13 1-165-991-11 CERAMIC,DISC 0.22nF 5% 50V
(E, HK, ME)
C1SD13 1-165-567-11 FILM,PEF 1.2nF 10% 50V
(AUS)
C1SF12 1-126-966-11 ELECT 33uF 20% 50V
(E, HK, ME)
C1SR12 1-124-285-11 ELECT 22uF 20% 16V
(AUS)
C1SR14 1-165-571-11 FILM,PEF 4.7nF 5% 50V
(AUS)
0
C1SS01 1-165-573-11 FILM,MPEF 100nF 20% 275V
0
C1SS02 1-165-573-11 FILM,MPEF 100nF 20% 275V
C1SS03 1-165-557-11 CERAMIC,DISC 2.2nF 20% 400V
(AUS:EZ121/EZ424, E, HK, ME)
C1SS12 1-165-990-11 CERAMIC,DISC 0.1nF 10% 1kV
C1SS13 1-165-990-11 CERAMIC,DISC 0.1nF 10% 1kV (AUS)
C1SS31 1-218-582-11 ELECT 10uF 20% 100V
C1SS32 1-126-970-11 ELECT 330uF 20% 50V
C1SS33 1-126-940-11 ELECT 330uF 20% 25V
C1SS34 1-126-940-11 ELECT 330uF 20% 25V
C1SS35 1-126-926-11 ELECT 1000uF 20% 10V
C1SS36 1-126-926-11 ELECT 1000uF 20% 10V
C1SS39 1-136-497-11 FILM,PEF 100nF 5% 50V
C317 1-126-458-61 ELECT 1uF 20% 50V
C318 1-126-458-61 ELECT 1uF 20% 50V
C321 1-161-494-11 CERAMIC,MLC-AXIAL 22nF +80-20% 25V
C322 1-126-458-61 ELECT 1uF 20% 50V
C325 1-126-437-11 ELECT 47uF 20% 25V
C326 1-126-458-61 ELECT 1uF 20% 50V
C329 1-115-339-11 CERAMIC,CHIP 100nF 10% 50V
C331 1-115-339-11 CERAMIC,CHIP 100nF +80-20% 50V
(E, HK, ME)
C331 1-216-295-11 RES-CHIP 0 5% 1/10W
(AUS)
C333 1-126-109-11 ELECT 10uF 20% 16V
C338 1-161-494-11 CERAMIC,MLC-AXIAL 22nF +80-20% 25V
C339 1-126-109-11 ELECT 10uF 20% 16V
C341 1-126-437-11 ELECT 47uF 20% 25V
C343 1-165-319-11 CERAMIC,CHIP 1000nF +80-20% 16V
C347 1-165-319-11 CERAMIC,CHIP 1000nF +80-20% 16V
C348 1-115-339-11 CERAMIC,CHIP 100nF 10% 50V
When indicating parts by reference number,
please include the board name.
The components identified by mark
0
or
dotted line with mark
0
are critical for safety.
Replace only with part number specified.
MAIN
• Abbreviation
AUS : Australia model
HK : Hong Kong model
ME : Middle East model
• Hi-Fi model: ED825/ED828/ED925/ED929/
EZ725/EZ727
Mono model: ED225/ED323/EZ121/EZ424
FUNCTION