21
Con
tr
olling De
vic
es
RM-VLZ620_U (US) 4-170-639-
12
(1)
2
Press and hold
SET
for more
than 3 seconds.
While keeping
SET
held
down, press , then release
both buttons.
The
SET
indicator
lights up.
3
Enter
- 8 - 8
.
The
SET
indicator flashes three
times to indicate that the setting
mode has been entered.
3 flashes
4
Press the Device Select
button for the device you
want to control.
The selected Device Select button
lights up.
5
Press the button on the RM-
VLZ620 you want to teach.
The
SET
indicator flashes with
the button press. (Learning
function standby.)
flash
Note
Perform the next step within 30 seconds.
Otherwise, the
SET
indicator flashes
once and the learning procedure returns
to Step 4.
6
Press the button on the
original remote control to
transmit the signal to the
RM-VLZ620.
During signal transfer, only the
SET
indicator stays lit, and the
Device Select button turns off.
After signal transfer is complete,
the
SET
indicator flashes three
times, and the RM-VLZ620
returns to the state in Step 4.
Data transfer
completed
Remote
control of
device
3 flashes
