31
For accurate learning
• Do not move the remote units during the learning
procedure.
• Be sure to press and hold the button of the other
remote control until you hear the confirmation
beep.
• Use fresh batteries in the other remote control
unit.
• Avoid learning in places under direct sunlight or
strong fluorescent lighting.
• The remote control signal direction may differ
depending on the remote control. If learning does
not work, try changing the position of the remote
control.
• When you program a remote control unit with an
interactive signal exchange system (supplied with
some Sony receivers and amplifiers) to the
Remote Commander, the response signal of the
Component may interfere with the learning of the
Remote Commander. In such a case, move to
another room, etc., where the signals will not
interfere.
• If the learning cannot be executed by connecting
an AC adaptor, disconnect the AC adaptor and
execute the learning again.
IMPORTANT
Be sure to place the Remote Commander out of
the reach of small children or pets.
Also, set the Hold function to lock the all the
buttons on the Remote Commander (page 17)
when it is not used. Devices such as air
conditioners, heaters, electric appliances, and
electric shutters or curtains receiving an infrared
signal can be dangerous if misused.
Summary of Contents for RM-AX5000
Page 52: ...4 000 116 11 1 ...
