32
5
Set the number of boards.
[No. of Boards(Vertical)]
Set the total number of boards in the vertical
direction to extract.
[No. of Boards(Horizontal)]
Set the total number of boards in the horizontal
direction to extract.
The following example shows a configuration with
two vertical and two horizontal boards.
6
When finished, click the [Next] button.
7
Set the output image.
If you want to capture not just the extraction range
but also the person, the output range must be
widened keeping the extraction range in the center.
The output range is displayed by a blue frame on the
preview screen. Move the bar left/right to change
the output range with the extraction range in the
center.
This setting is enabled when the overlap mode is set
to [Show Person].
8
Set the extraction field of view.
Select the output display result. When used together
with PTZ Auto Tracking, only [Full View] can be
selected.
[Full View]:
Output the entire extraction range.
[Cropped View]:
Can be selected when [No. of
Boards(Vertical)] is set to 1. Divide the
extraction range by the value of [No. of
Boards(Horizontal)], and the position containing
the person is output. When [No. of
Boards(Horizontal)] is set to 1, the number of
divisions is automatically determined from the
entire extraction area and margin ratio. When
[No. of Boards(Horizontal)] is set to 2 or higher,
the area is divided by the number of boards in the
horizontal direction.
The following shows an example of crop
division with cropped field of view and a display
example at the cropped field of view.
