23
[RTSP Authentication]
Set whether to use RTSP authentication as the user
authentication.
[RTSP Port Number]:
Set the port number to use for
RTSP streaming. The default setting is 554. The
RTSP server reboots when the setting is changed.
[RTSP Timeout]:
Specify the timeout value for a Keep-
Alive request in an RTSP session. You can specify a
timeout value in the range 0 seconds to 600 seconds.
When 0 seconds is specified, a timeout does not
occur for a Keep-Alive request.
[Codec] tab
Use the [Codec] tab to configure settings relating to
codecs. The codec settings are common to both the
RTMP/RTMPS protocol and RTSP protocol.
When [RTMP] is selected in [Streaming Service], only
images processed by the application can be streamed.
Accordingly, [Streaming Output 2] cannot be
configured. Set [Streaming Output 1] to [HDMI OUT 1]
or [HDMI OUT 2], according to the application being
used.
[Streaming Output 1], [Streaming Output 2]:
Select
the content ([HDMI OUT 1] or [HDMI OUT 2]) for
the streaming output.
[Image Size 1], [Image Size 2]:
Select the image size to
stream from the camera.
[H.264 Profile 1], [H.264 Profile 2]:
Select the H.264
codec video profile ([High], [Main], or [Baseline]).
The video compression efficiency increases in the
order [High], [Main], and [Baseline]. Certain profile
methods may not be handled correctly, depending on
your system. Select the method used by your system.
[Frame Rate 1], [Frame Rate 2]:
Specify the video
frame rate. The value indicates the number of frames
streamed per second (fps).
[I-picture Interval 1], [I-picture Interval 2]:
Set the
I-picture insertion interval in seconds.
[Bit Rate Compression Mode 1], [Bit Rate
Compression Mode 2]:
Set to CBR (fixed) in the
current software version, and cannot be modified.
[Bit Rate 1], [Bit Rate 2]:
You can set the bit rate for
each video streaming line. High-quality video
streaming is supported by setting the bit rate to a high
value.
[Audio Bit Rate 1], [Audio Bit Rate 2]:
To place
emphasis on data capacity, select [128kbps]. To
place emphasis on audio quality, select [256kbps].
This setting has no affect on the audio signal
embedded in the HDMI output.
For the RTMP/RTMPS protocol, configure each setting
on the [Codec] tab using the recommended values for
the site being used. Communication bandwidth
restrictions may occur, depending on the Internet line
being used. Adjust the bit rate within the range that does
not exceed the communication bandwidth.
Starting/stopping RTMP streaming
RTMP streaming is started and stopped from the run
screen of the application. When RTMP streaming is
configured on the [Streaming] tab and [Codec] tab, the
[Stream Now] / [Stop Stream] button is displayed on the
run screen of the application.
[Stream Now], [Stop Stream]
Use to start and stop streaming.
[Stream Now]:
Displayed when the stream is stopped.
Click the button to start streaming.
[Stop Stream]:
Displayed when streaming. Click the
button to stop streaming.
Server URL display
Displays the server URL during streaming. Click to
display the streaming settings in a pop-up dialog.
Live indicator
Displayed when streaming. A red frame is displayed
around the image being streamed.
Note
Live indicator
Stream Now/Stop Stream
Server URL display
