Sony PXW-FS5, Firmware Update

Page: 15 / 86

5
GB
GB
Shooting and recording in RAW mode is
now supported.
Obtaining an install key
In order to use the RAW recording function,
it is necessary to purchase the “CBKZ-
FS5RIF” (sold separately), obtain the install
key via the Internet according to the
following procedure, then install the option
on the camcorder.
For details, follow the procedure in the
Installation Guide of the “CBKZ-FS5RIF”
(sold separately).
Connecting devices for recording
Signals output from the SDI OUT jack of
this camcorder can be converted by the
HXR-IFR5 (sold separately), and recorded
as RAW images on the AXS-R5 (sold
separately).
• The software version of the AXS-R5 must
be Ver. 1.20 or later.
When shooting RAW images, the following
settings on the camera are recommended.
– White balance: 3200K, 4300K, or 5500K
– ISO sensitivity/gain: Minimum ISO
sensitivity/0 dB
RAW recording supported by the
camcorder
• RAW output only
• RAW internal recording (XAVC
HD)
• 4K Super Slow Motion
• 2K Super Slow Motion
Notes when shooting RAW images
• You can trigger an external recorder to
start/stop recording by pressing the
START/STOP button on the camcorder.
However, the status of the external
recorder cannot be checked on the LCD
screen.
• Triggering an external recorder is always
enabled when recording in RAW. The
RAW Format
Recording
Preparing to record in RAW
mode
Purchase the “CBKZ-FS5RIF” (sold
separately).
r
Obtain an install key.
r
Install the option on the camcorder.
r
Record in RAW mode.
75
Ω
coaxial cable
(commercially available)
Battery
pack
HXR-IFR5
Interface Unit
AXS-R5 RAW
Recorder
Camcorder
Continued ,