Sony PXW-FS5, Firmware Update

Page: 18 / 86

8
GB
You can set the function to assign to the
S&Q button when recording in RAW mode.
Select
(SYSTEM) t [ S&Q
BUTTON SET] in the menu and select a
function.
* When [ 4K/2K SUPER SLOW] is
selected, the function switches to [ 4K
SUPER SLOW]
t
[ 2K SUPER SLOW]
t
OFF in sequence each time you press the
S&Q button.
z
Tip
• Available only when full auto mode is off. Note
that exposure correction is set to manual.
The zebra function has been enhanced in
this version, allowing you to select the
following two types of setting. Also, the
level settings can now be adjusted in 1%
increments.
• Zebra 1: Set a reference level and range for
zebra display.
• Zebra 2: Display zebra above a set level.
Select (DISPLAY SET)
t
[ZEBRA]
in the menu, and set the following items.
*1 Zebra 1 level (reference level)
*2 Zebra 1 range
*3 Zebra 2 level (minimum level)
When ZEBRA1 or ZEBRA2 is selected, the
icon or icon appears.
b Notes
• Zebra 1 and zebra 2 cannot be displayed at the
same time.
• Zebra is not recorded onto the memory card.
• When [ZEBRA SELECT] is OFF, the zebra
point of the histogram is not displayed.
z
Tip
• You can assign [ZEBRA] to an ASSIGN button.
The setting switches to OFF
t
ZEBRA1
t
ZEBRA2 each time you press the button.
Setting the S&Q button for
RAW
Settings (default setting in bold)
[ 4K/2K SUPER SLOW ]*,
[ 4K SUPER SLOW],
[ 2K SUPER SLOW]
Zebra 1 / Zebra 2
Setting zebra
Item Settings (default
setting in bold)
[ZEBRA SELECT] OFF , ZEBRA1,
ZEBRA2
[ZEBRA1 LEVEL]
*1 0% to 109% (1%
increments) (
70% )
[ZEBRA1 APERTURE
LEVEL]
*2
2% to 20% (2%
increments) (
10% )
[ZEBRA2 LEVEL]
*3 0% to 109% (1%
increments) (
100% )