Sony PMW-500 Operation Manual Download

Page: 177 / 203

Operation Warnings

177

Chap

ter
9

Main

nanc

Warning Indication

Nea

WARNING indicator Warning sound

Tally/REC

Battery remaining

—

Problem

Operation in the recorder
module

Action to take

Free space on the SxS
memory card has
become insufficient.

Recording continues.

Replace it with another at the earliest opportunity.

Med

WARNING indicator Warning sound

Tally/REC

Battery remaining

—

Problem

Operation in the recorder
module

Action to take

No space is left on the
SxS memory card.
Recording, clip
copying and clip
division cannot be
performed.

Recording stops.

Replace it with another.

ery

r En

WARNING indicator Warning sound

Tally/REC

Battery remaining

Problem

Operation in the recorder
module

Action to take

The battery power will
be exhausted soon.

Recording continues.

Charge the battery pack at the earliest
opportunity.

tter

End

WARNING indicator Warning sound

Tally/REC

Battery remaining

Problem

Operation in the recorder
module

Action to take

The battery pack is
exhausted. Recording
cannot be performed.

Recording stops.

Connect a power source via the DC IN connector
or stop operation to charge the battery pack.

emp

era

tur

e H

WARNING indicator Warning sound

Tally/REC

Battery remaining

—

Problem

Operation in the recorder
module

Action to take

The internal
temperature has risen
above a safe operation
limit.

Recording continues.

Suspend operation, turn off the power, and wait
until the temperature falls.

Summary of Contents for PMW-500












































































































































































































Search results

Summary of Contents for PMW-500

Reviews:

Related manuals for PMW-500

Brands by name

Popular brands

Sony PMW-500, Operation Manual

Search results

Summary of Contents for PMW-500

Reviews:

Related manuals for PMW-500

Brands by name

Popular brands