manualshive.com logo in svg

Sony PMW-500, Operation Manual

The Sony PMW-500 Operation Manual is available for free download on our website. This comprehensive manual provides step-by-step instructions and useful tips to maximize your experience with the Sony PMW-500, ensuring smooth operation and optimal performance. Enhance your understanding of this exceptional product and download the manual today from manualshive.com.

Share
Download
background image

Operating Clips with a Computer

170

Cha

pte

r 

8 

 Co
nnec

ting

 E

xte

rnal
 De
vic

es

• To turn on the tally indicator on the viewfinder screen 

to warn the operator

When you connect a computer to the PC 
connector with a USB cable (not supplied), the 
message “Connect USB Now?” is displayed to 
prompt you to confirm that you wish to enable the 
USB connection.
If you select “Cancel” or push the MENU 
CANCEL/PRST/ESCAPE down to the ESCAPE 
side or if you disconnect the USB cable, the 
message “Connect USB Now?” disappears.

If you select “Execute” and press the MENU 
knob, the USB connection is enabled and this 
camcorder is recognized as an extension drive. 
You can carry out the same operations by using 
the arrow buttons (

J

, 

j

, 

K

, 

k

) 

(see page 22)

.

If the USB connection is enabled during 
recording/playback operation, the operation is 
stopped and the message “USB Connecting” 
appears on the viewfinder screen.
At this time, the output signal from the VIDEO 
OUT connector, and HD/SD SDI OUT connector 
changes to a black signal.

Notes

• The camcorder cannot be operated for recording, 

playback, and so on while the message “USB 
Connecting” is displayed.

• When the computer accesses the media loaded in the 

camcorder, do not try to carry out the following 
operations.
- Operating the camcorder (turning the power on/off, 

switching the operation mode, etc.)

- Removing or loading a media from an active slot 

(being accessed from the computer)

- Removing or connecting the USB cable

Disabling the USB connection

To disable the USB connection, follow the same 
procedure as that for removing a device from the 
computer.
To enable the USB connection again, first 
disconnect the USB cable and then reconnect it. 

The message “Connect USB Now?” appears 
again.

Note

If you connect the camcorder to the computer using an 
i.LINK cable, you cannot use the computer to operate 
files stored in a recording media loaded in the memory 
card slot of this camcorder.

To remove an SxS memory card

Windows

1.

Click on the icon of “Safely Remove 
Hardware” on the task bar of the computer.

2.

Select “Safely remove SxS Memory Card - 
Drive(X:)” from the displayed menu.

3.

Check that the Safe To Remove Hardware 
message appears then remove the card.

Macintosh

Drag the SxS memory card icon on the desktop to 
Trash.
If the SxS memory card icon is located on Finder, 
click on the eject icon on its side.

To use the application software

To copy clips to the local disk of a computer, the 
supplied application software must be used.
Install the application software on the supplied 
CD-ROM to your computer.
Although the data regarding recorded materials 
are stored over multiple files and folders, you can 
easily handle the clips without considering such 
data and directory structure by using the supplied 
application software.

Note

If you operate, e.g. copy the clips on the SxS memory 
card by using the Explorer (Windows) or Finder 
(Macintosh), the subsidiary data contained by the clips 
may not be maintained. To avoid such a problem, use the 
application software.

For installation and operations, refer to the User’s 
Guide contained in the CD-ROM. 

For support information on the application software, 
visit on the cover page of the supplied CD-ROM.

To use a nonlinear editing system

For a nonlinear editing system, optional editing 
software that corresponds to the recording 
formats used with this camcorder is required.

Summary of Contents for PMW-500












































































































































































































Reviews:

No comments

Related manuals for PMW-500

EAGO DZ962F8 Installation Instruction preview
DZ962F8
Brand: EAGO Pages: 11
Louet Octado Instructions Manual preview
Octado
Brand: Louet Pages: 42
Moeller EMT6 Installation Instructions preview
EMT6
Brand: Moeller Pages: 2
Panasonic WV-SPN311 Operating Instructions Manual preview
WV-SPN311
Brand: Panasonic Pages: 218
SAF P89 Service Manual preview
P89
Brand: SAF Pages: 28
Ferplast DUBAI User Manual preview
DUBAI
Brand: Ferplast Pages: 48
Automatic Systems TR490 Installation Manual preview
TR490
Brand: Automatic Systems Pages: 16
Zinco BLAZE User Manual preview
BLAZE
Brand: Zinco Pages: 12
Iron logic Matrix III MF-I User Manual preview
Matrix III MF-I
Brand: Iron logic Pages: 6
Jegs 81165 Installation Instructions preview
81165
Brand: Jegs Pages: 2
Kross S-150 Installation Manual & User Manual preview
S-150
Brand: Kross Pages: 2
Wahlberg Winch 50 Double User Manual preview
Winch 50 Double
Brand: Wahlberg Pages: 29
OBID CPR50.10-E Installation Manual preview
CPR50.10-E
Brand: OBID Pages: 31
Pond Defence 500 Manual preview
500
Brand: Pond Defence Pages: 5
iGenix IG9802 User Manual preview
IG9802
Brand: iGenix Pages: 16
DigiTech DigiGate-700 User Manual preview
DigiGate-700
Brand: DigiTech Pages: 266
Ansee BWR-01A Operation Instructions preview
BWR-01A
Brand: Ansee Pages: 2
Haier CXW-219-D68VQ Manual preview
CXW-219-D68VQ
Brand: Haier Pages: 13

Brands by name

Popular brands

Load more brands