8 (E)
Display Panel
1
INITIAL button
Holding this button pressed for more than five seconds
while “Initial Request” or “Full Initial Request” is
shown in the display window initializes the system.
While the system is being initialized, the BUSY
indicator is lit.
Each time the power is turned on, the system must be
initialized.
If Auto Initial on the Set Up menu is activated, the
system is automatically initialized after the power is
turned on.
2
READY indicator
This indicator lights when the system is ready to be
operated.
3
BUSY indicator
This indicator remains lit while the system is
operating.
It is also lit during initialization.
4
ERROR indicator
This indicator lights if some trouble occurs in the
system.
Perform the following according to the message that
appears in the display window.
When “Initial Request” or “Full Initial Request”
appears:
Press the INITIAL button to reinitialize the
system.
When “Power off Request” appears:
Turn the power off and then on again.
If the problem persists after executing the above,
consult Sony service personnel.
5
Display window
The operating condition, menu items, or values are
displayed here.
6
MENU button
Pressing this button displays one of the following
menu items in the display window. If the display
window is closed when you press the button, the
window is turned opened. Press the button again.
To select a displayed item, press one of the arrow
buttons.
Hours Meter
Console: Total time of power supply
I/O1 (
×
1000): Opening the upper IN/OUT port
door (
×
1000 times)
I/O2 (
×
1000): Opening the lower IN/OUT port
door (
×
1000 times)
Access (
×
1000): Transfer operations
(
×
1000 times)
X: Transferred length of the transfer on an X axis
(in the horizontal direction) (km)
Y: Transferred length of the transfer on an Y axis
(in the vertical direction) (km)
Z: Transferred length of the transfer on an Z axis
(in depth) (km)
Hand (
×
1000): Opening and closing the hands
(
×
1000 times)
Program Version
Firmware version (two types of firmware: CCC
and SV1)
Set Up
Serial No.
Date
Time
LCD Contrast
Auto Initial
Configuration
Current configuration of the system in alphabet
B: DMS-B150L/B80L
b: DMS-B210S/B110S
E: DMS-EX150L
e: DMS-EX210S
For details, see “Menu Operation” on page 12(E).
Location and Function of Parts
3
BUSY indicator
4
ERROR indicator
POWER
ON
OFF
READY
BUSY
ERROR
INITIAL
MENU
ENTER
ESC/
CLR
f
F
g
G
1
INITIAL button
2
READY indicator
5
Display window
6
MENU button
7
Arrow buttons
8
ENTER button
9
ESC/CLR button