36
4-1 Overview
Cha
p
te
r 4
Han
d
ling
File
s
4-1-4
Assigning User-
Defined Clip and Clip List
Names
The following standard format names are
assigned automatically to clips and clip lists
that are created or recorded by XDCAM
devices.
Clips:
C0001.MXF to C4999.MXF
Clip lists:
E0001E01.SMI to
E0099E01.SMI
This unit can handle clips and clip lists with
user-defined names as well as names in the
standard format.
1)
1) This is supported from firmware version 1.5
and utility software version 1.50.
Limitations
• Letters, numbers and symbols from the
Unicode 2.0 character set can be used.
However, the following control
characters and symbols cannot be
used.
- Control characters: U+0000 to
U+001F, U+007F
- Symbols: ", *, /, :, <, >, ?, \, |
• Depending on the character type, the
length of user-defined names (the “C*”
or “E*E01” part) may be limited to 14
characters. (The limit for ASCII
characters is 56 characters.)
• All file name extensions are converted
automatically to uppercase.
• Titles are used as user-defined clip names
on this unit. Therefore, the available
characters are limited to those supported
by the title function.
• Files generated along with clips and clip
lists use the same names (the “C*” or
“E*” part of the following file names).
- Clips: Metadata files (C*M01.XML),
proxy AV data files (C*S01.MXF)
- Clip lists: Metadata files
(E*M01.XML)
• The following names cannot be assigned.
- Clips: C0000.MXF
- Clip lists: E0000E01.SMI,
E0100E01.SMI to E9999E01.SMI,
E0000.SMI, E0100.SMI to
E9999.SMI
• The following names should be avoided.
- Clips: C5000.MXF to C9999.MXF
- Clip lists: E0001.SMI to E0099.SMI
See “File Name Setting” (page 49) for information
about how to make file name settings.
C0020.MXF
TITLE00020
C0002.MXF
TITLE00002
TITLE00001
C0001.MXF
C0017.MXF
TITLE00037
C0002.MXF
TITLE00022
TITLE00021
C0001.MXF
Clips recorded on Disc 1
Clips recorded on Disc 2
