Sony PDW-1, Operation Manual, Page: 22 / 56

22 3-2 Connections and Settings
Chapt
er
3
P
rep
ar
at
ions
Pins 1, 3, and 4 of switch S1401 on the rear panel of the unit must be
set to OFF (the factory default setting is OFF) to enable utility
software settings. If any of these pins are in the ON position, return
them to the OFF position.
Example connection
For the method of transferring video/audio signals (AV/C data) to a nonlinear
editing system, refer to the manual provided with the editing software to be used.
3-2-2 Connecting to a Computer (FAM connection)
By connecting this unit to a computer with an FAM (file access
mode) connection, you can use the utility software
(see page 39) , and
the PDZ-1 Proxy Browsing Software (Windows only).
The FAM driver (see page 19) must be installed in advance.
Note
Note
1
PDW-D1
S400 (i.LINK)
- AC IN
DC IN
S400
1
: i.LINK cable (not supplied)
To i.LINK (IEEE1394) connector
a)
Laptop computer (with editing
software supporting DVCAM
format installed)
In the PC operation settings dialog box of the
utility software, in the FAM operation section,
set “Login” to “Inhibit”
(see page 42)
.
a) On a Macintosh computer, to FireWire port