Why isn't my DVD playing properly?
If a region code warning appears when you are using the DVD player application, it may be that the region code of the DVD
you are trying to play is incompatible with the region code setting of your optical drive. A region code is listed on the disc
packaging. Region code indicators such as "1" or "ALL" are labeled on some DVDs to indicate the type of player that can
play the disc. Unless a "1" or "ALL" appears on the DVD or on its packaging, you cannot play the disc on this system.
If you hear audio but cannot see video, your computer's video resolution may be set too high. To improve video resolution,
verify that your screen area is set to 1024 x 768, using 32-bit color (preset factory default). To verify or change your video
resolution:
1.
Click
Start
in the Windows taskbar and then select
Control Panel
.
2.
Select
Appearances and Themes
, then select
Change the screen resolution
.
3.
Click the
Settings
tab.
4.
Change the Screen resolution and Color quality to the desired levels.
5.
Click
Apply
and then click
OK
.
If you see video but cannot hear audio, check all of the following:
Verify that your DVD player's mute feature is turned off.
Check the master volume setting in the Audio Mixer.
Check the volume settings on your computer speakers.
Check the connections between your speakers and the computer.
Verify that drivers are installed properly, by following these steps:
1.
Click
Start
in the Windows taskbar, then select
Control Panel
.
2.
Click
Performance and Maintenance
and then click
Systems
. The System Properties dialog box appears.
3.
Select the
Hardware
tab and then select the
Device Manager
button to view installed drivers.
A dirty or damaged disc may also cause the computer to stop responding while it tries to read the disc. If necessary,
remove the disc and check that it is not dirty or damaged.
To recover the CD or DVD software applications that are preinstalled on your computer, see
Reinstalling software
in
the online User Guide for more information.
Page 73
