Sony PCG-Z1WA VAIO User Guide (primary manual) User Manual Download

Page: 82 / 171

Restart your computer by clicking

Start

Turn Off Computer

, and

Restart

. If the

New Hardware Wizard

appears, follow the on-screen instructions.

Make sure the computer recognizes the printer. Follow these steps:



Click

Start

Control Panel

Printers and Other Hardware

, and then

Printers and Faxes

If the computer recognizes the printer, it will be listed in the

Printers and Other Hardware

window.

If the computer does not recognize the printer, you may need to install the printer driver software. See
the guide that accompanied the printer for more information.

See the guide that accompanied the printer for more information on its installation and use.

Page 82

Summary of Contents for PCG-Z1WA VAIO User Guide (primary manual)












































































































































































Search results

Summary of Contents for PCG-Z1WA VAIO User Guide (primary manual)

Reviews:

Related manuals for PCG-Z1WA VAIO User Guide (primary manual)

Brands by name

Popular brands

Sony PCG-Z1WA VAIO User Guide (primary manual), User Manual

Search results

Summary of Contents for PCG-Z1WA VAIO User Guide (primary manual)

Reviews:

Related manuals for PCG-Z1WA VAIO User Guide (primary manual)

Brands by name

Popular brands