Sony PCG-Z1WA VAIO User Guide (primary manual) User Manual Download

Page: 12 / 171

Using the Battery

Your computer comes equipped with one battery bay. For information on how to extend the life of the battery, see

Conserving Battery Power.



Inserting a battery



Removing a battery



Locating battery information



Charging a battery



Notes on batteries



Frequently asked questions

When operating your computer on battery power, your computer's CPU speed is reduced.

The battery that comes with your computer is not fully charged at the time of purchase.

The brightness of your computer screen automatically dims when you switch from AC power to battery power. To

increase the brightness, press the

and

keys, and then press the

Up Arrow

Right Arrow

key.

For safety and/or optimum performance, Sony recommends using genuine Sony rechargeable battery packs.

Page 12

Summary of Contents for PCG-Z1WA VAIO User Guide (primary manual)












































































































































































Search results

Summary of Contents for PCG-Z1WA VAIO User Guide (primary manual)

Reviews:

Related manuals for PCG-Z1WA VAIO User Guide (primary manual)

Brands by name

Popular brands

Sony PCG-Z1WA VAIO User Guide (primary manual), User Manual

Search results

Summary of Contents for PCG-Z1WA VAIO User Guide (primary manual)

Reviews:

Related manuals for PCG-Z1WA VAIO User Guide (primary manual)

Brands by name

Popular brands