Sony PCG-VX89 VAIO User Guide (primary manual) User Manual Download Page 92

Page: 92 / 200

VAIO Computer Quick Start

Inserting Memory Stick media

Before using Memory Stick media, back up important data. The media slot
accommodates only one Memory Stick media at a time.

To insert Memory Stick media

Insert the Memory Stick media with the arrow facing up and toward the
Memory Stick media slot.

Carefully slide the Memory Stick media into the slot until it clicks in place.
The Memory Stick media indicator light briefly flashes.

✍

MG Memory Stick media has the MG mark.

✍

Inserting the media in the wrong direction may damage the connector pins.

Inserting Memory Stick media

Memory Stick

media

Insert Memory Stick media

with the arrow facing toward

the Memory Stick media slot.

Summary of Contents for PCG-VX89 VAIO User Guide (primary manual)









































































































































































































Search results

Summary of Contents for PCG-VX89 VAIO User Guide (primary manual)

Reviews:

Related manuals for PCG-VX89 VAIO User Guide (primary manual)

Brands by name

Popular brands

Sony PCG-VX89 VAIO User Guide (primary manual), User Manual

Search results

Summary of Contents for PCG-VX89 VAIO User Guide (primary manual)

Reviews:

Related manuals for PCG-VX89 VAIO User Guide (primary manual)

Brands by name

Popular brands