Sony PCG-V505EC User Manual Download

Page: 13 / 148

Inserting a battery

To insert a battery

Turn the computer over, and slide the

UNLOCK/LOCK

latch on the bottom of the computer to the

UNLOCK

position.

Align the grooves on the battery with the tabs on the back of the computer.

Inserting a Battery

Slide the battery into the computer until it clicks into place.

Slide the

UNLOCK/LOCK

latch into the

LOCK

position.

If a port replicator is attached to your computer, do not insert or remove the battery. Lifting and turning the computer

with the port replicator attached could cause a temporary loss of power.

Some programs and peripheral devices prevent the system from automatically entering Hibernate mode. If you are using
battery power, save your data frequently to avoid data loss and manually activate a power saving mode. See

Using power

saving modes

for more information.

Page 13

Summary of Contents for PCG-V505EC





















































































































































Search results

Summary of Contents for PCG-V505EC

Reviews:

Related manuals for PCG-V505EC

Brands by name

Popular brands

Sony PCG-V505EC, User Manual

Search results

Summary of Contents for PCG-V505EC

Reviews:

Related manuals for PCG-V505EC

Brands by name

Popular brands