Sony PCG-8A8M Page 91 User Manual Download

Page: 91 / 119

Sony Notebook

User Guide

Getting help

n N

My software program locks up or crashes

Contact the software publisher or designated provider for technical support.

My touchpad interprets a single tap as a double-click

Open the

Mouse

icon in the

Control Panel

and change the button assignments in the

Mouse Properties

dialog box. One of the buttons is assigned to the double-click action.

My mouse does not work

❑

If you are using an external serial PS/2 mouse, check that the mouse is plugged into the mouse connector
of your optional port replicator.

❑

If you are using an optional Sony USB mouse, check that the appropriate driver and software are
properly installed.

❑

Check that the USB mouse is plugged into the USB connector.

About the display

My LCD does not display anything

❑

Check that the computer and display are both plugged into a power source and that they are turned on.

❑

Check that the power indicator on the front panel of the computer is on.

❑

Check that the battery packs are inserted properly and that they are charged.

❑

Adjust the brightness of the LCD.

❑

The computer may be in LCD (video) standby mode. Press any key to activate the display.

❑

The display mode may be set to external display mode. Press and hold the

<Fn>

key while pressing

<F7>

several times.

Summary of Contents for PCG-8A8M
























































































































Search results

Summary of Contents for PCG-8A8M

Reviews:

Related manuals for PCG-8A8M

Brands by name

Popular brands

Sony PCG-8A8M, User Manual

Search results

Summary of Contents for PCG-8A8M

Reviews:

Related manuals for PCG-8A8M

Brands by name

Popular brands