NW-A100TPS/A105/A105HN/A106HN
18
Sony CONFIDENTIAL
For Authorized Servicer
5. The right-click while pressing the Shift key in the state of step 4.
6. Select the “Open PowerShell window here” from the displayed
menu, and launch the PowerShell application software.
7. Input the following command and press the Enter key.
“.\optcopy_adb.bat”
Note 5:
An error may be displayed when connecting for the
fi
rst time. In
that case, enter the “.\optcopy_adb.bat” command again and press
the Enter key.
PS C:\Users\xxxx\Desktop\xxxx>.\optcopy_adb.bat
Input
Tool folder name
8. Check that the following
fi
gure message has been displayed, and
input “y”, and press the Enter key.
Input
9. The pre-installed content setting for the WALKMAN main unit
is executed, and when completed, the message “COMPLET-
ED.” is displayed.
(Displayed characters/values in the following
fi
gure are exam-
ple)
Note 6:
It takes time to
fi
nish writing. Never disconnect the USB Type-C
cable while writing.
PS C:\Users\xxxx\Desktop\xxxx>_
10. Close the PowerShell window.
This completes the Pre-Installed content setting.
Perform “6. Factory Setting Firmware Writing” while keeping the
test mode menu screen is displayed.
Note:
Make sure that “3. Perform Each Test Mode”, “4. Each Initial Setting”
and “5. Pre-Installed Content Setting” are correctly completed before
performing “6. Factory Setting Firmware Writing”.
6. Factory Setting Firmware Writing
Write the
fi
rmware to set the WALKMAN main unit to the product
state.
IMPORTANT NOTE
Be sure to perform each test mode and each initial setting are
complete before factory setting
fi
rmware writing.
When factory setting
fi
rmware writing is started, each test mode
and each initial setting cannot be performed.
6-1. Advance preparation
a. Windows PC (OS: Windows 10 or later)
b. USB Type-C cable (USB-A
y
USB-C)
c. Factory setting tool
Destination
Tool
AEP, UK
icx1293-04.00.P.x.xx.xx-001-user-installer-
releasekeys.zip
US, CND, E,
AUS, KR, LA
icx1293-04.00.P.x.xx.xx-002-user-installer-
releasekeys.zip
EE
icx1293-04.00.P.x.xx.xx-003-user-installer-
releasekeys.zip
TW
icx1293-04.00.P.x.xx.xx-004-user-installer-
releasekeys.zip
CH
icx1293-04.00.P.x.xx.xx-005-user-installer-
releasekeys.zip
Note 1:
When checking the destination of this unit, refer to “WALKMAN
MAIN UNIT IDENTIFICATION METHOD” on page 7.
Note 2:
The PC con
fi
guration setting tool performed in “5. Pre-Installed
Content Setting” is not required. The factory setting
fi
rmware can
be written on a normal Windows PC (OS: Windows 10 or later).
Note 3:
“x.xx.xx” of each tool name indicates the version. Be sure to use
the latest version.
Note 4:
Con
fi
rm with each service headquarters for the obtaining method of
factory setting tool and its latest version.
Note 5:
Factory setting tool, be sure to used by OS of Windows 10 or later.
a. Windows
PC
b. USB Type-C
cable
c. Factory set-
ting tool
(OS: Windows
10 or later)
(USB-A
y
USB-C)
Ver. 1.2
SYS SET
2020/02/27 22:57:21 (GMT+09:00)
