NW-A100TPS/A105/A105HN/A106HN
13
Sony CONFIDENTIAL
For Authorized Servicer
3. Check that the speci
fi
ed item is displayed at the top of the screen.
Others
(OTR BDHP command)
[510N]
Bundle HP
setting
NOHP
510N
Example:
When “510N” is selected
4. Switch the [HOLD] switch in the order of OFF
t
ON, or ON
t
OFF
t
ON to return to the “Others” mode menu screen.
Others
(OTR BDHP command)
[510N]
Bundle HP
setting
NOHP
510N
Diagnosis APP
[ver X.XX.XX]
Others
RTC check
Set destination
Sound pressure
FW version check
NAND check
Bundle HP check
Color variation
EU Vol regulation
Console ON/OFF
Printk ON/OFF
Safety standard
40th anniversary
Key and IV
U-Boot password
Others mode
menu screen
Bundle HP check
screen
– [HOLD] switch –
OFF
r
ON
ON
r
OFF
r
ON
or
ON
OFF
This completes the bundled headphones presence/absence setting.
Perform “4-4. Main unit body color setting” while keeping the “Oth-
ers” mode menu screen is displayed.
4-4. Main unit body color setting
Perform set the main unit body color.
Note 1:
Cannot set the main unit body color after all settings are complete.
Main unit body color setting procedure:
Note 2:
After returning to the test mode menu after setting the bundled
headphones presence/absence, refer to “4-1. Others mode menu
display” on page 10 to switch to the “Others” mode menu screen.
1. Press the [+] or [–] button on the “Others” mode menu screen,
select “Color variation” and press the [
u
] button.
Diagnosis APP
[ver X.XX.XX]
Others
RTC check
Set destination
Sound pressure
FW version check
NAND check
Bundle HP check
Color variation
EU Vol regulation
Console ON/OFF
Printk ON/OFF
Safety standard
40th anniversary
Key and IV
U-Boot password
Diagnosis APP
[ver X.XX.XX]
Others
RTC check
Set destination
Sound pressure
FW version check
NAND check
Bundle HP check
Color variation
EU Vol regulation
Console ON/OFF
Printk ON/OFF
Safety standard
40th anniversary
Key and IV
U-Boot password
Others
(OTR CLVR command)
[NOCOLOR]
Color variation
setting
NOCOLOR
ORANGE
RED
BLUE
GREEN
BLACK
Select
“Color variation”
[+] button
Move up
[–] button
Move down
[
u
] button
Decision
2. Press the [+] or [–] button on the “Color variation” screen, select
main unit body color and press the [
u
] button.
Note 3:
“NOCOLOR” is not used.
Note 4:
If the main unit body color is “Ash Green”, select “GREEN”.
Note 5:
Refer to “COLOR VARIATIONS” on page 6 for the main unit body
color.
Others
(OTR CLVR command)
[NOCOLOR]
Color variation
setting
NOCOLOR
ORANGE
RED
BLUE
GREEN
BLACK
Others
(OTR CLVR command)
[NOCOLOR]
Color variation
setting
NOCOLOR
ORANGE
RED
BLUE
GREEN
BLACK
Example: Select “ORANGE”
[+] button
Move up
[–] button
Move down
[
u
] button
Decision
– Continued on next page –
SYS SET
2020/02/27 22:57:21 (GMT+09:00)
