39
Registering Devices
C
h
ap
te
r 4
A
pplic
at
io
n
S
e
tti
n
gs
Setting Items of Multiple Camera
Registration Dialog Box
This dialog box displays the results of the automatic
search, and allows you to register the detected devices
simultaneously.
It is displayed by selecting [Open Multiple Camera
Registration Window] in the Camera Auto Registration
dialog box, and clicking [OK].
After configuring each item, click [Register].
Analog cameras without input signals will not be detected
with the automatic search.
Network
A list of the devices connected to the network selected in
the drop-down menu is displayed.
Reload
This performs the automatic search again.
Take care because apart from the user name and password
of the administrator, all of the values you entered up until
now will be replaced with the results obtained with the
automatic search.
Input All
This displays the Input All dialog box
Show
This allows you to use the following conditions to narrow
down the display of devices shown in the device list.
Unregistered Cameras
This displays only the devices that have not yet been
registered to NSR.
Registered Cameras
This displays only the devices that have already been
registered to NSR.
All Cameras
This displays all of the devices detected with the
automatic search.
Device List
This displays a list of the devices detected with the
automatic search.
Terget
Select the check boxes of the devices to register to
NSR.
Thumbnail
This displays thumbnail images from the camera.
Images may not be displayed in some cases.
Model Name
This displays the type of device.
Camera Name
This displays the device name.
IP Address
This displays the IP address of the device.
Port
This displays the port number on the device side for
when connecting with the device.
The default setting is “80.”
User Name
Enter the user name for connecting to the device.
Password
Enter the password for connecting to the device.
Serial No.
This displays the serial number of the device.
Version
This displays the firmware version of the camera.
Mac address
This displays the MAC address of the device.
Network
This displays the network in which the device is
corrected.
The user name and password for a device cannot be
changed from NSR. To change them, access the device
directly from a Web browser. For details, refer to the
instruction manual of the device to be used. If you
change the user name and password for a device
registered to NSR, you must also change the
configurations in NSR.
Registration
This registers the devices with check marks to NSR, and
closes the dialog box.
Cancel
This cancels the registration and close the dialog box.
Caution
Caution
Summary of Contents for NSR-500
Page 133: ......
