Sony MHC-V808 Operating Instructions Manual Download Page 63

Page: 63 / 68

Tape Deck

The tape does not record.

• No tape in the cassette holder.
• The tab has been removed from the

cassette (see “To save a tape
permanently” on page 60).

• The tape has reeled to the end.

The tape does not record nor play or there
is a decrease in sound level.

• The heads are dirty. Clean them (see

“Cleaning the tape heads” on page 60).

• The record/playback heads are

magnetized. Demagnetize them (see
“Demagnetizing the tape heads” on page
60).

The tape does not erase completely.

• The record/playback heads are

magnetized. Demagnetize them (see
“Demagnetizing the tape heads” on page
60).

There is excessive wow or flutter, or the
sound drops out.

• The capstans or pinch rollers are dirty.

Clean them (see “Cleaning the tape
heads” on page 60).

Noise increases or the high frequencies are
erased.

• The record/playback heads are

magnetized. Demagnetize them (see
“Demagnetizing the tape heads” on page
60).

Tuner

Severe hum or noise (“TUNED” or
“STEREO” flashes in the display.

• Adjust the antenna.
• The signal strength is too weak. Connect

the external antenna.

A stereo FM program cannot be received in
stereo.

• Press STEREO/MONO so that “STEREO”

appears.

If other troubles not described
above occur, reset the system as
follows:

Unplug the power cord.

Plug the power cord back in.

Press NEXT, ENTER/NEXT, and DISC 1 at
the same time.

Press POWER to turn on the power.

Summary of Contents for MHC-V808





































































Search results

Summary of Contents for MHC-V808

Reviews:

Related manuals for MHC-V808

Brands by name

Popular brands

Sony MHC-V808, Operating Instructions Manual

Search results

Summary of Contents for MHC-V808

Reviews:

Related manuals for MHC-V808

Brands by name

Popular brands