5
VIDEO OUT
S VIDEO OUT
continued
2
Connect the FM/AM antennas.
Set up the AM loop antenna, then
connect it.
3
Connect the video input jack of your
TV to the VIDEO OUT jack with the
supplied video connecting cable.
When using a TV
Turn on the TV and select the video input so you
can view the pictures from this system.
Tip
For even higher quality video images, you can use
an optional S VIDEO cord to connect the S VIDEO
input jack on your TV to the S VIDEO OUT jack.
AM loop antenna
FM75
AM
Extend the FM lead
antenna horizontally.
Gray (
‘
)
Black (
’
)
R
+
L
+
–
Insert only the stripped portion.
Note
Do not place the surround speakers on top of
a TV. This may cause distortion of the colors
on the TV screen.
4
Set SYSTEM SELECT (color system)
to the appropriate position (PAL or
NTSC), according to your TV.
If your TV automatically changes the color
system according to the input signal:
The factory setting (AUTO) automatically
changes the color system of the video output
according to the color system of the current
VIDEO CD. If you turn off the system, the
color system will be set to NTSC
automatically when you turn on the system
again.
If the color system of your TV is NTSC:
Set SYSTEM SELECT to NTSC.
Pictures recorded in the PAL color system will be
stretched vertically and will be displayed with the
upper and lower parts of the picture cut off.
If the color system of your TV is PAL:
Set SYSTEM SELECT to PAL.
Pictures recorded in the NTSC color system will be
stretched horizontally and will be displayed with
the upper and lower parts of the screen masked in
black.
Note
Be sure to turn off the system before changing the
SYSTEM SELECT setting.
5
Set VOLTAGE SELECTOR to the
position of your local power line
voltage.
S Y S T E M S E L E C T
NTSC
PAL
AUTO
VOLTAGE SELECTOR
110-120V
220-240V
