43
Recording a CD by
specifying track order
— Program Edit
1
π
1
2
6
4
5 10 12
11
VOLUME
1DISC PROGRAM
VOLUME
1DISC PROGRAM
Total playing time
(including selected track)
Disc number
1
Place a CD and insert a blank tape
into deck B.
2
Press FUNCTION repeatedly until
“CD” appears in the display.
3
Press PLAY MODE repeatedly until
“PROGRAM” appears in the
display.
4
Press one of the DISC 1 – 3 buttons
to select a CD.
5
Turn the jog dial until the desired
track appears in the display.
6
Press ENTER/NEXT.
The track is programmed. “STEP” and
the programmed playing order appear,
followed by the total playing time.
7
To program additional tracks to be
recorded on side A, repeat steps 4 to
6.
Skip step 4 to select tracks from the same
disc.
8
Press
∏
on the remote to insert a
pause at the end of side A.
“P” appears in the display and the total
playing time resets to “0.00” in the
display.
CHECK
3
continued
You can record tracks from all the CDs in the
order you want. When programming, make
sure the playing times for each side do not
exceed the length of one side of the tape.
This function cannot be used during menu
playback of VIDEO CDs with PBC functions
(Ver 2.0).
DOLBY
NR
POWER
Previously selected track
Total playing time
Track number
EDIT
FUNCTION
8
