Sony MHC-V808 Operating Instructions Manual Download Page 6

Page: 6 / 68

Step 1: Hooking up the system
(continued)

Tip

With normal use, the batteries should last for about
six months. When the remote no longer operates the
system, replace both batteries with new ones.

Note

If you do not use the remote for a long period of
time, remove the batteries to avoid possible damage
from battery leakage.

To attach the front speaker pads

Attach the supplied front speaker pads to the
bottom of the front speakers to stabilize the
speakers and prevent them from slipping.

When carrying this system

Do the following to protect the CD
mechanism.

Press FUNCTION repeatedly until “CD”
appears in the display.

Hold down PLAY MODE and press
POWER so “LOCK” appears in the display.

Connect the power cord to a wall
outlet.

Demo mode appears in the display.
If the plug on this unit does not fit
your wall outlet, detach the supplied
adapter from the plug (except for
Malaysia and China).

Deactivate the demo mode by
pressing DISPLAY/DEMO when
the system power is turned off.

Inserting two size AA (R6)
batteries into the remote

Using the remote

You can use the shaded buttons shown below
to operate Sony TV.

Press on the remote

Turn the TV on or

TV POWER.

off

Switch the TV’s

TV/VIDEO.

video input

Change the TV

TV CH +/–.

channels

Adjusts the volume TV VOL +/–.
of the TV speaker(s)

TV/VIDEO

TV POWER

TV VOL +/–

TV CH +/–

Summary of Contents for MHC-V808





































































Search results

Summary of Contents for MHC-V808

Reviews:

Related manuals for MHC-V808

Brands by name

Popular brands

Sony MHC-V808, Operating Instructions Manual

Search results

Summary of Contents for MHC-V808

Reviews:

Related manuals for MHC-V808

Brands by name

Popular brands