44
9
Repeat steps 5 and 6 for tracks from
the same disc or steps 4 through 6
for tracks from another disc to
program the remaining tracks to be
recorded on side B.
10
Press CD SYNCHRO.
Deck B stands by for recording and the
CD player stands by for playback.
·
(for front side) lights up.
11
Press DIRECTION repeatedly to
select
A
to record on one side.
Select
a
(or RELAY) to record on
both sides.
12
Press
∏
PAUSE on deck B.
Recording starts.
To stop recording
Press
π
on deck B or
p
on the CD player.
To check the order
Press CHECK on the remote repeatedly. After
the last track, “CHECK END” appears.
To cancel Program Edit
Press PLAY MODE repeatedly until
“PROGRAM” or “SHUFFLE” disappears
from the display.
Tip
When you want to reduce the hiss noise in low-level
high-frequency signals, press DOLBY NR on the
remote so “DOLBY NR B” appears after pressing
CD SYNCHRO.
Selecting tape length
automatically
— Tape Select Edit
You can check the most suitable tape length
for recording a CD. Note that you cannot use
Tape Select Edit for discs containing more
than 20 tracks.
This function cannot be used during menu
playback of VIDEO CDs with PBC functions
(Ver 2.0).
/
After inserting a CD, press EDIT on
the remote once, so that “EDIT”
flashes.
The required tape length for the
currently selected CD appears, followed
by the total playing time and tracks for
side A and side B.
Note
You cannot use this function after programming.
In order to use this function, you must first clear the
entire program (see “Clear the entire program” in
the table on page 41).
Recording a CD by specifying track
order (continued)
