![background image](http://html.mh-extra.com/html/sony/mhc-v800/mhc-v800_operating-instructions-manual_1330129030.webp)
Chapter 7: Additional Features
EN
30
To wake up to the radio
Tune in the preset station you want.
To wake up to a CD
Insert a CD. If you want to play it from a
desired track, do the necessary
procedures for programmed CD play.
(see “Playing Tracks in the Desired
Order (program play)”.)
To wake up to a tape
Insert the tape with the side you want to
play facing forwards you. If you insert
the tapes in both decks, you will hear the
sound from deck A.
2
Turn VOLUME to adjust the volume.
The music will start playing with the
adjusted volume when the preset time
comes.
3
Press TIMER.
4
Press
t
SET.
5
Use the JOG dial to select either DAILY
1 or 2 and press ENTER/NEXT.
“ON” appears and the hour digits flash
in the display.
6
Use the JOG dial to set the hour you
want the system to turn on and press
ENTER/NEXT.
Set the minutes in the same way. “OFF”
appears and the hour digits flash in the
display.
7
Use the JOG dial to set the hour you
want the system to turn off and press
ENTER/NEXT.
Set the minutes in the same way.
8
Use the JOG dial to select a sound
source.
The display changes as follows:
Timer-Recording
Radio Programs
You can set the timer to record from the
radio at a certain time. This timer works
only once for each setting.
Make sure the clock has been set correctly.
Be sure to preset the station you want to
listen to beforehand. (See “Presetting Radio
Stations”.)
1
Press
§
EJECT and insert a blank tape in
deck B with the side you want to record
on facing forward.
2
Tune in a preset station you want to
record.
3
Select dual or single-sided recording.
* Recording always stops at the end of the
reverse side. Be sure to start from the
front side.
4
Press TIMER.
5
Press
t
SET.
6
Use the JOG dial to select REC and press
ENTER/NEXT.
“ON” appears and the hour digits flash
in the display.
7
Use the JOG dial to set the hour you
want the system to turn on and press
ENTER/NEXT.
6,
7,
8
POWER
m
ON
,9
4
5
3
1
t
SELECT
9
Press ENTER/NEXT.
The preset items appear in the display
sequentially.
10
Press POWER to turn off the system.
The power comes on at the preset time
and the music will play at the volume
you selected in step 2. At the turn-off
time, the power will go off again.
To change the preset timer settings
Start over from step 1.
To check the preset timer settings
1
Press TIMER.
2
Press
t
SELECT and use the JOG dial to
choose the mode you want to check.
3
Press ENTER/NEXT.
The preset items appear in the display
sequentially, then the original display
returns.
To change the timer
Select the timer display you desire in step 2
of “To check the preset timer settings”.
To cancel the timer
1
Press TIMER.
2
Press
t
SELECT and use the JOG dial to
choose “TIMER OFF.”
3
Press ENTER/NEXT.
The next time you want to use the timer,
select the timer display you used in step
2 (DAILY 1 or DAILY 2) and press
ENTER/NEXT.
Notes
• You cannot set the timer so that the timer
ON and OFF times are the same.
• The timer operation starts 15 seconds
before the timer ON time, if you perform
another operation during that period, the
timer operation may not be performed
correctly.
• You cannot activate wake-up timer and
timer-recording at the same time.
• The daily timer function can not activate
during the sleep count down.
If you want to wake up to different tracks
on a CD
Create another program (see “Playing
Tracks in the Desired Order (program
play)”.) and turn off the power.
➔
continued
DAILY 1
REC
DAILY 2
125
63
250
500
1k
2k
4k
8k
16k(Hz)
DOLBY NR
OFF
TIMER
CD
1DISC
DAILY1
1
2
3 4
5
6
7
8
VOLUME
TUNER
TAPE
CD
125
63
250
500
1k
2k
4k
8k
16k(Hz)
DOLBY NR
OFF
TIMER
CD
1DISC
DAILY1
1
2
3 4
5
6
7
8
VOLUME
flashing
125
63
250
500
1k
2k
4k
8k
16k(Hz)
DOLBY NR
OFF
TIMER
CD
DISC
DAILY1
1
2
3 4
5
6
7
8
VOLUME
.
flashing
To record
One side of the tape
Both sides*
Press DIRECTION to
select
A
ß
or RELAY
flashing
125
63
250
500
1k
2k
4k
8k
16k(Hz)
DOLBY NR
OFF
TIMER
CD
1DISC
1
2
3 4
5
6
7
8
REC
VOLUME