![background image](http://html.mh-extra.com/html/sony/mhc-m20d/mhc-m20d_operating-instructions-manual_1330062037.webp)
37
GB
BL
UET
OO
TH C
onne
ction
MHC-M20D.GB.4-736-071-
13
(1)
Pairing this system
with a BLUETOOTH
device
Pairing is an operation where
BLUETOOTH devices register with
each other beforehand. Once a
pairing operation is performed, it
does not need to be performed
again.
1
Place the BLUETOOTH device
within 1 meter from the unit.
2
Press FUNCTION repeatedly to
select the BLUETOOTH function.
“BLUETOOTH” appears on the
display.
Hint
•
•
When there is no pairing information
on the system (for example, when
you use the BLUETOOTH function
for the first time after purchase),
“PAIRING” flashes on the display and
the system enters the pairing mode.
Proceed to step 4.
•
•
If the system is connected to
a BLUETOOTH device, press
BLUETOOTH on the unit to
disconnect the BLUETOOTH device.
3
Hold down PAIRING on the
unit for 2 seconds or more.
“PAIRING” flashes on the display.
4
Turn on the BLUETOOH function
on the BLUETOOTH device and
perform the pairing procedure.
For details, refer to the operating
instructions of your BLUETOOTH
device.
5
Select “MHC-M20D” on the
display of the BLUETOOTH
device.
Perform this step within 5 minutes,
otherwise pairing will be canceled.
In this case, repeat from step 3.
Note
If passkey is required on the
BLUETOOTH device, enter “0000”.
“Passkey” may be called “Passcode”,
“PIN code”, “PIN number”, or
“Password”.
6
Establish connection with the
BLUETOOTH device.
When pairing is completed and the
BLUETOOTH connection is
established, BLUETOOTH device
name appears on the display.
Depending on the BLUETOOTH
device, connection may start
automatically after pairing is
completed.
You can check the BLUETOOTH
device address by pressing DISPLAY
repeatedly.
Note
•
•
You can pair up to 8 BLUETOOTH
devices. If the 9th BLUETOOTH device is
paired, the oldest paired device will be
deleted.
•
•
If you want to pair with another
BLUETOOTH device, repeat steps 1 to 6.
To cancel the pairing operation
Hold down PAIRING on the unit for
2 seconds or more until “BT AUDIO”
appears on the display.
To erase the pairing information
You can erase all pairing information
by resetting the system. See
“Resetting the system” (page 59).