![background image](http://html.mh-extra.com/html/sony/mhc-m20d/mhc-m20d_operating-instructions-manual_1330062059.webp)
59
GB
Additional Inf
orma
tion
MHC-M20D.GB.4-736-071-
13
(1)
•
•
If your TV is not compatible with
Audio Return Channel, TV sound
will not be output from the system
even if the system is connected to
the TV’s HDMI IN jack. To output TV
sound from the system, connect
an audio cable (not supplied)
(page 19).
•
•
Change the function of the system
to “TV” (page 19).
•
•
Increase the volume on the
system.
•
•
Depending on the order in which
you connect the TV and the
system, the system may be muted
and “ ” (muting) lights up on the
display of the unit. If this happens,
turn on the TV first, then the
system.
•
•
Set the speakers setting of the TV
(BRAVIA) to Audio System. Refer to
the operating instructions of your
TV on how to set the TV.
The sound is output from both the
system and the TV.
•
•
Mute the sound of the system or
the TV.
•
•
Change the speaker output on the
TV to TV speaker or Audio System.
The Control for HDMI function
does not work properly.
•
•
Check the connection with the
system (page 16).
•
•
Enable the Control for HDMI
function on the TV. For details,
refer to the operating instructions
of your TV.
•
•
Wait a while, then try again. If you
unplug the system, it will take
a while before operations can
be made. Wait for 15 seconds or
longer, then try again.
•
•
Make sure the TV connected to
the system support the Control for
HDMI function.
•
•
The type and number of devices
that can be controlled by the
Control for HDMI function is
restricted by the HDMI CEC
standard as follows:
•
—Recording devices (Blu-ray Disc
recorder, DVD recorder, etc.): up
to 3 devices
•
—Playback devices (Blu-ray Disc
Player, DVD player, etc.): up to
3 devices (this system uses one
of them)
•
—Tuner-related devices: up to
4 devices
•
—Audio system (receiver/
headphone): up to 1 device
(used by this system)
Wireless Party Chain
BLUETOOTH device cannot be
connected to the system during
Wireless Party Chain function.
•
•
After connecting all the systems,
perform the pairing and
connecting operations between
the BLUETOOTH device and the
Party Host.
Resetting the system
If the system still does not operate
properly, reset the system to factory
default settings.
Use the buttons on the unit to
perform this operation.
1
Unplug the AC power cord (mains
lead), then plug it back in.
2
Press
to turn on the system.
3
Hold down VOCAL FADER and
MIC ECHO for about 3 seconds.
“RESET” appears on the display.
After the reset completes, the
system automatically reboots. Press
to turn on the system.