![background image](http://html.mh-extra.com/html/sony/mhc-m20d/mhc-m20d_operating-instructions-manual_1330062056.webp)
56
GB
MHC-M20D.GB.4-736-071-
13
(1)
“OVER CURRENT” appears on the
display.
•
•
A problem has been detected
with the level of electrical current
from the
(USB) port. Turn off
the system and remove the USB
device from the port. Make sure
there is no problem with the USB
device. If this display pattern
persists, contact your nearest Sony
dealer.
Erroneous display.
•
•
The data stored in the USB
device may have been corrupted,
perform the transfer again.
•
•
The character codes that can be
displayed by this system are as
follows:
•
—Upper cases (A to Z)
•
—Numbers (0 to 9)
•
—Symbols (< > * +, [ ] \ _)
Other characters appear as “_”.
The USB device is not recognized.
•
•
Turn off the system and reconnect
the USB device, then turn on the
system.
•
•
Check the information on the
website about compatible USB
devices (page 11).
•
•
The USB device is not working
properly. Refer to the operating
instructions of the USB device on
how to deal with this problem.
Playback does not start.
•
•
Turn off the system and reconnect
the USB device, then turn on the
system.
•
•
Check the information on the
website about compatible USB
devices (page 11).
Playback does not start from the
first file.
•
•
Set the play mode to Normal Play
(page 25).
Files cannot be played back.
•
•
Make sure you have selected
the correct Media Mode before
playback.
•
•
USB devices formatted with file
systems other than FAT16 or FAT32
are unsupported.*
•
•
If you use a partitioned USB
device, only files on the first
partition can be played back.
* This system supports FAT16 and FAT32,
but some USB devices may not support
all of these FAT. For details, refer to the
operating instructions of each USB
device or contact the manufacturer.
Picture
There is no picture.
•
•
Check that the system is
connected securely.
•
•
If the HDMI cable is damaged,
replace it with a new one.
•
•
Make sure you connect the unit
to the HDMI input jack on your TV
(page 18).
•
•
Make sure you turn on the TV and
operate the TV correctly.
•
•
Make sure you select the input
according to the connection on
the TV so that you can view the
pictures from the system.
•
•
(Except for Latin American,
European, and Russian models)
Make sure you set the color
system correctly, according to your
TV’s color system.
Picture noise appears.
•
•
Wipe the disc clean (page 62).
•
•
(Except for Latin American,
European, and Russian models)
When you play back a VIDEO CD
recorded in a different color
system from the one you set to the
system, the picture image may be
distorted (page 20, 30).