![background image](http://html.mh-extra.com/html/sony/mhc-m20d/mhc-m20d_operating-instructions-manual_1330062058.webp)
58
GB
MHC-M20D.GB.4-736-071-
13
(1)
•
•
If there is equipment that
generates electromagnetic
radiation, such as a wireless LAN,
other BLUETOOTH device, or a
microwave oven nearby, move
them away.
The sound of your BLUETOOTH
device cannot be heard on this
system.
•
•
Increase the volume on your
BLUETOOTH device first, then
adjust the volume using
+/–.
There is severe hum, noise, or
distorted sound.
•
•
If there are obstacles between
the system and your BLUETOOTH
device, remove or avoid the
obstacles.
•
•
If there is equipment that
generates electromagnetic
radiation, such as a wireless LAN,
other BLUETOOTH device, or a
microwave oven nearby, move
them away.
•
•
Turn down the volume of the
connected BLUETOOTH device.
Control for HDMI (“BRAVIA”
Sync)
The system does not turn on even
when the TV is turned on.
•
•
Hold down SHIFT and press
SETUP, then set [HDMI SETUP]
– [CONTROL FOR HDMI] to [ON]
(page 31). The TV must support
the Control for HDMI function
(page 45). For details, refer to
the operating instructions of your
TV.
•
•
Check the speaker settings of the
TV. The system power syncs with
the speaker settings of the TV.
For details, refer to the operating
instructions of your TV.
•
•
If the sound was output from the
TV’s speakers the previous time,
the system does not turn on even
when the TV is turned on.
The system turns off when the TV
is turned off.
•
•
Check the setting of [HDMI SETUP]
– [STANDBY LINKED TO TV]
(page 32). When [STANDBY
LINKED TO TV] is set to [ON], the
system turns off automatically
when you turn off the TV
regardless of the input.
The system does not turn off even
when the TV is turned off.
•
•
Check the setting of [HDMI SETUP]
– [STANDBY LINKED TO TV] (page
32).
To turn the system off
automatically regardless of the
input when you turn off the TV, set
[STANDBY LINKED TO TV] to [ON].
The TV must support the Control
for HDMI function (page 45).
For details, refer to the operating
instructions of your TV.
No TV sound is output from the
system.
•
•
Check the type and connection of
the HDMI cable or audio cable that
is connected to the system and
the TV (page 18).
•
•
If your TV is compatible with
Audio Return Channel, make
sure the system is connected
to an ARC-compatible HDMI
IN jack of the TV (page 18).
If sound is still not output or if
sound is interrupted, connect
an audio cable (not supplied),
hold down SHIFT and press
SETUP, then set [HDMI SETUP] –
[AUDIO RETURN CHANNEL] to
[OFF] (page 32).