![background image](http://html.mh-extra.com/html/sony/mhc-gzx33d/mhc-gzx33d_operating-instructions-manual_1330057040.webp)
model name [MHC-GZX88D/GZX55D/GZX33D]
[4-449-370-
12
(2)] GB
40
GB
filename[D:\NORM'S JOB\SONY HA\SO130014\MHC-GZX88D_55D_33D (PMRF
02)\4449370122_GB\070TUN.fm]
masterpage:Left
Setting the
Bluetooth
audio codecs
You can select the
Bluetooth
audio codecs
when the connected
Bluetooth
device
supports Advanced Audio Coding
(AAC).
1
Hold down SHIFT, then press
OPTIONS.
2
Press
/
repeatedly to select
“BT AAC”, then press
.
3
Press
/
repeatedly to select
“BT AAC ON” or “BT AAC OFF”.
• BT AAC ON: Advanced Audio
Coding (AAC) is selected if the
Bluetooth
device supports AAC.
• BT AAC OFF: Sub Band Codec
(SBC) is selected.
Notes
• You can enjoy high quality sound if the AAC
is selected. In case you cannot listen to AAC
sound from your device, select “BT AAC
OFF”.
• If you change this setting while the system is
connected to a
Bluetooth
device, the
Bluetooth
device will be disconnected. To
connect to the
Bluetooth
device, perform the
Bluetooth
connection again.
Setting/Canceling
Bluetooth
standby
mode
The system goes into
Bluetooth
standby
mode and waits for a
Bluetooth
connection, even when the system is
turned off.
1
Hold down SHIFT, then press
OPTIONS.
2
Press
/
repeatedly to select
“BT STANDBY”, then press
.
3
Press /
repeatedly to select
“STANDBY ON” or “STANDBY
OFF”.
4
Press
?/1
to turn off the system.
When
Bluetooth
standby mode is set to
on, the system will turn on
automatically when you establish the
Bluetooth
connection from the
Bluetooth
device.
Note
The system will not enter
Bluetooth
standby
mode if you erase the pairing information.
Summary of Contents for MHC-GZX33D
Page 63: ......