![background image](http://html.mh-extra.com/html/sony/mhc-gzx33d/mhc-gzx33d_operating-instructions-manual_1330057037.webp)
model name [MHC-GZX88D/GZX55D/GZX33D]
[4-449-370-
12
(2)] GB
37
GB
filename[D:\NORM'S JOB\SONY HA\SO130014\MHC-GZX88D_55D_33D (PMRF
02)\4449370122_GB\070TUN.fm]
masterpage:Right
Blu
e
tooth
The BLUETOOTH indicator lights up or
flashes in blue to show the
Bluetooth
status.
Pairing is an operation where
Bluetooth
devices register with each other
beforehand. Once a pairing operation is
performed, it does not need to be
performed again. If your device is an
NFC-compatible smartphone, the manual
pairing procedure is not necessary.
1
Place the
Bluetooth
device
within 1 meter from the system.
2
Press BLUETOOTH on the unit
to select
Bluetooth
function.
“BLUETOOTH” appears in the
display panel.
Note
If the system is connected to a
Bluetooth
device, press BLUETOOTH to disconnect
the
Bluetooth
device.
3
Hold down BLUETOOTH on the
unit for 2 seconds or more.
“PAIRING” flashes in the display
panel.
4
Perform the pairing procedure
on the
Bluetooth
device.
For details, refer to the operating
instructions of your
Bluetooth
device.
5
Select the model number of the
unit on the display of the
Bluetooth
device.
For example, select “SONY MHC-
GZX88D” (or MHC-GZX55D/
GZX33D). If passkey is required on
the
Bluetooth
device, enter “0000”.
6
Perform the
Bluetooth
connection on the
Bluetooth
device.
When pairing is completed and the
Bluetooth
connection is established,
the
Bluetooth
device name appears in
the display panel.
Depending on the
Bluetooth
device,
connection may start automatically
after pairing is completed.
You can check the
Bluetooth
device
address by pressing DISPLAY
repeatedly.
Notes
• You can pair up to 9
Bluetooth
devices. If the
10th
Bluetooth
device is paired, the least
recently connected device will be replaced by
the new one.
• “Passkey” may be called “Passcode”, “PIN
code”, “PIN number”, or “Password”, etc.,
depending on the device.
• The pairing standby status of the system is
canceled after about 5 minutes. If pairing is
not successful, repeat from step 1.
• While connected to a
Bluetooth
device, this
system cannot be detected and connection
cannot be established from another
Bluetooth
device which is never paired before.
• If you want to pair with another
Bluetooth
device, repeat steps 1 to 6.
To cancel pairing operation
Hold down BLUETOOTH on the unit for
2 seconds or more until “BLUETOOTH”
appears in the display panel.
About the BLUETOOTH
indicator
System status
Indicator status
Bluetooth
standby
Flashes slowly
Bluetooth
pairing
Flashes quickly
Bluetooth
connecting
Flashes
Bluetooth
connection is
established
Lights up
Pairing this system with a
Bluetooth
device
Summary of Contents for MHC-GZX33D
Page 63: ......