![background image](http://html.mh-extra.com/html/sony/mhc-gn1300d/mhc-gn1300d_operating-instructions-manual_1329994070.webp)
model name [MHC-GN1300D]
[4-132-091-
14
(2)] GB
70
GB
filename[D:\NORM'S JOB\SONY HA\SO0163\MHC-GN1300D_PMRF
01\4132091142_GB\GB100SND.fm]
masterpage:Left
Adjusting the sound
You can reinforce the bass and create a
more powerful sound.
Press GROOVE on the unit
repeatedly.
GROOVE ON*
t
Z-GROOVE ON*
t
GROOVE OFF
t
GROOVE ON
t
…
* The volume switches to power mode and the
equalizer curve changes.
Note
“EFFECT ON” appears when you press
DISPLAY repeatedly while “GROOVE” or
“Z-GROOVE” is turned on.
Tip
The default setting is “GROOVE ON”.
Press PRESET EQ repeatedly on
the unit to select the preset effect
you want.
Preset effect options
You can adjust the sound by raising or
lowering the level of specific frequency
band, then store up to three user equalizer
settings in the memory.
Use the buttons on the unit for the
operation.
1
Press EQ BAND/MEMORY
repeatedly to select a frequency
band.
2
Turn OPERATION DIAL clockwise
or counterclockwise to adjust the
level.
3
Repeat steps 1 and 2 to adjust the
level of other frequency bands.
4
Press ENTER.
A user equalizer number flashes in the
display.
5
Turn OPERATION DIAL to select a
user equalizer number (1~3) you
want to store the equalizer setting.
Select “EXIT?” to cancel storing.
6
Press ENTER.
This setting is automatically stored as
the user equalizer setting you selected
in step 5.
The previous setting stored at this
memory location is erased and replaced
by the new setting.
To call up the user equalizer setting
Press USER EQ repeatedly to select
“USER EQ 1”, “USER EQ 2” or
“USER EQ 3”.
Sound Adjustment
Reinforcing the sound
Selecting the preset effect
Effect
Category
ROCK, POP,
JAZZ, DANCE,
SOUL, TECHNO,
HIP HOP
Standard music sources
MP3 EQ
MP3 audio files
FLAT
Original music source
(cancel the preset effect)
Creating your own sound
effect
TAPE
GROOVE
Frequency band
Frequency level