![background image](http://html.mh-extra.com/html/sony/mhc-gn1300d/mhc-gn1300d_operating-instructions-manual_1329994020.webp)
model name [MHC-GN1300D]
[4-132-091-
14
(2)] GB
20
GB
filename[D:\NORM'S JOB\SONY HA\SO0163\MHC-GN1300D_PMRF
01\4132091142_GB\GB05CON.fm]
masterpage:Left
Progressive is a method for displaying TV
images which reduces flickering and
sharpens the image. To use this method,
you need to connect to a TV that can
accept progressive signals.
You can output video signals from
COMPONENT VIDEO OUT jacks in
Interlace or Progressive format.
1
Press FU/– repeatedly
to select “DVD” or “USB” (or
press DVD or
on the unit).
2
Press
DISPLAY when
playback is stopped.
The Control Menu appears on the TV
screen.
3
Press
V
or
v
repeatedly to
select
(SETUP), then
press ENTER.
The options for “SETUP” appear.
4
Press
V
or
v
repeatedly to
select “CUSTOM”, then press
ENTER.
The Setup Menu appears.
5
Press
V
or
v
repeatedly to
select “VIDEO SETUP”, then
press ENTER.
The options for “VIDEO SETUP”
appear.
6
Press
V
or
v
repeatedly to
select “PROGRESSIVE
(COMPONENT OUT)”, then
press ENTER.
The options for “PROGRESSIVE
(COMPONENT OUT)” appear.
7
Press
V
or
v
repeatedly to
select the setting you want, then
press ENTER.
The default setting is underlined.
• OFF: Outputs interlace signals.
Select this setting when:
– your TV does not accept
progressive signals.
– your TV is connected to jacks other
than the COMPONENT VIDEO
OUT jacks.
• ON: Outputs progressive signals.
Select this setting when:
– your TV accepts progressive
signals.
– your TV is connected to the
COMPONENT VIDEO OUT
jacks.
When you select “ON”, the
confirmation display appears. Follow
the steps below.
8
Press
B
or
b
repeatedly to
select “START”, then press
ENTER.
The system outputs the progressive
signal for few seconds. Check that the
screen is displayed correctly.
9
Press
B
or
b
repeatedly to
select “YES”.
The system outputs the progressive
signal. When you select “NO”, the
system does not output the progressive
signal.
Note
There would be no image on your TV or the
image is not clear if your setting does not match
your TV or connection.
Changing the format of the
video signal from COMPONENT
VIDEO OUT jacks
USB