![background image](http://html.mh-extra.com/html/sony/mhc-gn1300d/mhc-gn1300d_operating-instructions-manual_1329994093.webp)
model name [MHC-GN1300D]
[4-132-091-
14
(2)] GB
93
GB
Ad
dit
ion
al I
n
fo
rmatio
n
filename[D:\NORM'S JOB\SONY HA\SO0163\MHC-GN1300D_PMRF
01\4132091142_GB\GB120INF.fm]
masterpage:Right
• The AAC audio file does not have the
extension “.m4a”.
• The audio file is not stored in MP3/
WMA/AAC format.
• The JPEG image file does not have the
extension “.jpg” or “.jpeg”.
• The DivX video file does not have the
extension “.avi” or “.divx”.
• The MPEG4 video file does not have the
extension “.mp4” or “.m4v”.
• The JPEG image file is larger than
3,072 (width) × 2,048 (height) in normal
mode, or more than 2,000,000 pixels in
Progressive JPEG mode which is
mainly used on the Internet website.
• JPEG image files with a high width to
length ratio cannot be played back.
• Check the “MEDIA” setting (page 67).
• USB device formatted with file systems
other than FAT12, FAT16 or FAT32 are
unsupported.*
• The MP3 audio files in format other
than MPEG 1 Audio Layer 3 cannot be
played back.
• A WMA audio file that is the WMA
DRM, WMA Lossless, or WMA PRO
format cannot be played back.
• An AAC audio file that is the AAC
DRM or AAC Lossless format cannot
be played back.
• AAC audio files encoded at 96 kHz
cannot be played back.
• If you use a partitioned USB device,
only files on the first partition can be
played.
• The system can play back to a depth of
8 folders only.
• The number of folders has exceeded
200.
• The number of files has exceeded 150.
• Files that are encrypted or protected by
passwords, etc. cannot be played back.
• The MP3PRO audio file can be played
back as MP3 audio file.
* This system supports FAT12, FAT16 and
FAT32, but some USB devices may not
support all of these FAT. For details, refer the
operating instructions of each USB device or
contact the manufacturer.
Picture
There is no picture.
• Check that you have selected the correct
function using the FU/– (or
function button on the unit).
• The VIDEO function is selected, but
there is no input signal.
• Check that the system is connected
securely.
• The video cord is damaged. Replace it
with a new one.
• Make sure you connect the unit to the
video input jack of your TV (page 19).
• Make sure you turn on the TV and
operate the TV correctly.
• Set “PROGRESSIVE (COMPONENT
OUT)” to “OFF” if you connect your
TV to the COMPONENT VIDEO OUT
jacks and your TV cannot accept
progressive signal (page 20).
• You have set to progressive format but
your TV cannot accept the signal in
progressive format. In this case, connect
the VIDEO OUT jack or the S VIDEO
OUT jack to the TV and set to the
Interlace format (page 20).
• Even if your TV is compatible with
progressive format (525p/625p) signals,
the image may be affected when you set
to progressive format. In this case, set to
Interlace format (the default setting)
(page 20).
• Make sure you select the video input on
the TV so that you can view the pictures
from the system.
• Make sure you set the color system
correctly, according to your TV’s color
system.
• The video signal from VIDEO IN
VIDEO jack is only output through
VIDEO OUT jack of this unit.
Continued
l