![background image](http://html.mh-extra.com/html/sony/mex-m100bt/mex-m100bt_operating-instructions-manual_1329902036.webp)
36
GB
Before installing, make sure the catches on both
sides of the bracket
are bent inwards 2 mm
(
3
/
32
in).
For Japanese cars, see “Mounting the unit in a
Japanese car” (page 36).
1
Position the bracket
inside the
dashboard, then bend the claws outward
for a tight fit.
2
Mount the unit onto the bracket
, then
attach the protection collar
.
Notes
If the catches are straight or bent outwards, the unit
will not be installed securely and may spring out.
Make sure the 4 catches on the protection collar
are properly engaged in the slots of the unit.
Mounting the unit in a Japanese car
You may not be able to install this unit in some
makes of Japanese cars. In such a case, consult your
Sony dealer.
TOYOTA
NISSAN
Note
To prevent malfunction, install only with the supplied
screws
.
For details, see “Detaching the Front Panel”
(page 8).
For details, see “Resetting the Unit” (page 8).
Mounting the unit in the dashboard or
the cutout hole on boat
CAUTION
Do not touch the left side of the unit when
removing from the dashboard. The heatsink on
the left side of the unit remains hot right after
use.
182 mm (7
1
/
4
in)
53 mm (2
1
/
8
in)
Catch
Inner console panel
Detaching and attaching the front panel
Resetting the unit
to dashboard/center console
Existing parts supplied with
your car
Bracket
Bracket
to dashboard/center console
Existing parts supplied with
your car
Bracket
Bracket