masterpage:Left
(3 column)
filename[F:\My Document\mds-
s50\4230403131\4230403131\423040313MDSS50U2\GB05OPE-U2.fm]
model name1[MDS-S50]]
[4-230-403-13(1)]
28
You can undo the last edit operation and restore
the contents of the MD to the condition that
existed before the operation. Note, however,
that you cannot undo an edit operation if you
perform any of the following operations after
the edit:
•
Start recording.
•
Press MUSIC SYNC on the remote.
•
Change the recorded level after recording (S.F
Edit).
•
Turn off the deck or eject the MD.
•
Disconnect the AC power cord.
1
While the deck is stopped, press MENU/
NO.
“Edit Menu” appears in the display.
2
Turn AMS (or press
.
/
>
repeatedly) until “Undo ?” appears.
“Undo ?” does not appear if no editing has
been done.
3
Press AMS or YES.
One of the messages appears depending on
the last edit operation.
4
Press AMS or YES.
“Complete!!” appears.
Undoing the last edit
— UNDO
Other Functions
You can use Fade-in Play to gradually increase
the signal level to the ANALOG OUT jacks and
the PHONES jack at the start of playing. Fade-
out Play gradually decreases the signal level at
the end of playing.
Fade-in Recording gradually increases the
signal level at the start of recording. Fade-out
Recording gradually decreases the signal level
at the end of recording.
Fade-in Play and Fade-in
Recording
During play pause (for Fade-in Play) or
recording pause (for Fade-in Recording),
press FADER on the remote.
b
flashes in the display and the deck performs
Fade-in Play or Fade-in Recording for five
seconds (factory setting) until the counter
reaches “0.0s.”
Fade-out Play and Fade-out
Recording
During play (for Fade-out Play) or
recording (for Fade-out Recording), press
FADER on the remote.
B
flashes in the display and the deck performs
Fade-out Play or Fade-out Recording for five
seconds (factory setting) until the counter
reaches “0.0s,” then pauses.
Fading in and fading out
