masterpage:Left
(3 column)
filename[F:\My Document\mds-
s50\4230403131\4230403131\423040313MDSS50U2\GB05OPE-U2.fm]
model name1[MDS-S50]]
[4-230-403-13(1)]
22
Dividing recorded tracks (continued)
4
While monitoring the sound, turn AMS
(or press
.
/
>
repeatedly) to locate
the dividing point.
You can shift the starting point by 1-frame
1)
intervals (1 frame = 1/86 second).
The time indication (minute, second, and
frame) of the current point is displayed and
the deck plays several seconds of the track to
that point repeatedly.
1) When recording in Stereo mode, you can shift
the starting point by 2-frame intervals (in
Monaural mode and LP2 Stereo mode) or by
4-frame intervals (in LP4 Stereo mode).
To find a point quickly
Specify a unit (minute, second, or frame) by
which the MD is advanced when you turn
AMS (or press
.
/
>
repeatedly).
To do this, press
m
/
M
in step 4
repeatedly to select minute, second, or
frame. The selected unit flashes in the
display.
5
Repeat step 4 until you have located the
dividing point.
6
Press AMS or YES.
“Complete!!” appears and the deck starts to
play the newly created track. Note that new
track has no name.
Tip
You can divide tracks while recording. For details, see
“Marking track numbers while recording” on page 10.
Dividing a track after
selecting the dividing point
1
While the deck is playing, press AMS at
the point you want to divide the track.
“- Divide -” and “-Rehearsal-” alternate in
the display and the deck starts to play from
the selected point repeatedly.
2
If necessary, do step 4 of “Dividing a
track after selecting the track” on
page 33 to finely adjust the dividing
point.
3
Press YES.
“Complete!!” appears for a few seconds and
the track is divided. The deck starts to play
the newly created track. Note that new track
has no name.
You can use this function to combine 2 tracks
into a single track. The total number of tracks
decreases by one and all tracks following the
combined ones are renumbered.
You can also use this function to erase
unnecessary track numbers.
Example: Combining track 3 to track 1.
Example: Combining track 1 to track 4.
If both of the combined tracks have a track
name, the name of the second track is erased.
1
While the deck is stopped, playing, or
paused, press MENU/NO.
“Edit Menu” appears in the display.
Combining recorded
tracks
— Combine Function
Track
number
Original
tracks
After
COMBINE
Original
tracks
After
COMBINE
